| 7305.31.00 | 81 | Other tubes and pipes (for example, welded, riveted or similarly closed), having circular cross-sections, the external diameter of which exceeds 406.4 mm, of iron or steel. - Other, welded: - Longitudinally welded - Other, of iron or non-alloy steel: - Standard pipes | KGM | | |
| 7305.31.00 | 89 | Other tubes and pipes (for example, welded, riveted or similarly closed), having circular cross-sections, the external diameter of which exceeds 406.4 mm, of iron or steel. - Other, welded: - Longitudinally welded - Other, of iron or non-alloy steel: - Other | KGM | | |
| 7305.31.00 | 91 | Other tubes and pipes (for example, welded, riveted or similarly closed), having circular cross-sections, the external diameter of which exceeds 406.4 mm, of iron or steel. - Other, welded: - Longitudinally welded - Other, of alloy steel: - Of stainless steel | KGM | | |
| 7305.31.00 | 99 | Other tubes and pipes (for example, welded, riveted or similarly closed), having circular cross-sections, the external diameter of which exceeds 406.4 mm, of iron or steel. - Other, welded: - Longitudinally welded - Other, of alloy steel: - Other | KGM | | |
| 7305.31.00 | 10 | Other tubes and pipes (for example, welded, riveted or similarly closed), having circular cross-sections, the external diameter of which exceeds 406.4 mm, of iron or steel. - Other, welded: - Longitudinally welded - For use in the manufacture of goods of Section XVI or of Chapter 73, such goods being used in the recovery or production of crude oil from shales, oil-sands or tar-sands; Of iron or non-alloy steel, for use in the manufacture of separators or treaters (water, oil, gas), for installation between the wellhead assembly or surface oil pumping unit and the field marketing valve at oil or natural gas wells; Tubes and pipes, electric resistance welded, with an external diameter of 457.2 mm or more but not exceeding 609.6 mm, having a wall thickness of 9.525 mm or more but not exceeding 12.7 mm, containing, by weight, 0.37% or more but not exceeding 0.48% of carbon and 0.6% or more but not exceeding 1.2% of manganese, for use in the manufacture of induction hardened abrasion resistant tubes or pipes | KGM | | |
| 7305.39.00 | | Other tubes and pipes (for example, welded, riveted or similarly closed), having circular cross-sections, the external diameter of which exceeds 406.4 mm, of iron or steel. - Other, welded: - Other | KGM | Free | CCCT, LDCT |
| 7305.39.00 | 10 | Other tubes and pipes (for example, welded, riveted or similarly closed), having circular cross-sections, the external diameter of which exceeds 406.4 mm, of iron or steel. - Other, welded: - Other - For use in the manufacture of goods of Section XVI or of Chapter 73, such goods being used in the recovery or production of crude oil from shales, oil-sands or tar-sands | KGM | | |
| 7305.39.00 | 80 | Other tubes and pipes (for example, welded, riveted or similarly closed), having circular cross-sections, the external diameter of which exceeds 406.4 mm, of iron or steel. - Other, welded: - Other - Other, of iron or non-alloy steel | KGM | | |
| 7305.39.00 | 90 | Other tubes and pipes (for example, welded, riveted or similarly closed), having circular cross-sections, the external diameter of which exceeds 406.4 mm, of iron or steel. - Other, welded: - Other - Other | KGM | | |
| 7305.90.00 | | Other tubes and pipes (for example, welded, riveted or similarly closed), having circular cross-sections, the external diameter of which exceeds 406.4 mm, of iron or steel. - Other | KGM | Free | CCCT, LDCT |
| 7305.90.00 | 10 | Other tubes and pipes (for example, welded, riveted or similarly closed), having circular cross-sections, the external diameter of which exceeds 406.4 mm, of iron or steel. - Other - Of iron or non-alloy steel | KGM | | |
| 7305.90.00 | 20 | Other tubes and pipes (for example, welded, riveted or similarly closed), having circular cross-sections, the external diameter of which exceeds 406.4 mm, of iron or steel. - Other - Of alloy steel | KGM | | |
| 7314.20.00 | | Cloth (including endless bands), grill, netting and fencing, of iron or steel wire; expanded metal of iron or steel. - Grill, netting and fencing, welded at the intersection, of wire with a maximum cross-sectional dimension of 3 mm or more and having a mesh size of 100 cm² or more | KGM | Free | CCCT, LDCT |
| 7314.20.00 | 10 | Cloth (including endless bands), grill, netting and fencing, of iron or steel wire; expanded metal of iron or steel. - Grill, netting and fencing, welded at the intersection, of wire with a maximum cross-sectional dimension of 3 mm or more and having a mesh size of 100 cm² or more
- For concrete reinforcement | KGM | | |
| 7314.20.00 | 90 | Cloth (including endless bands), grill, netting and fencing, of iron or steel wire; expanded metal of iron or steel. - Grill, netting and fencing, welded at the intersection, of wire with a maximum cross-sectional dimension of 3 mm or more and having a mesh size of 100 cm² or more
- Other | KGM | | |
| 8419.11.00 | 90 | Machinery, plant or laboratory equipment, whether or not electrically heated (excluding furnaces, ovens and other equipment of heading 85.14), for the treatment of materials by a process involving a change of temperature such as heating, cooking, roasting, distilling, rectifying, sterilizing, pasteurizing, steaming, drying, evaporating, vaporizing, condensing or cooling, other than machinery or plant of a kind used for domestic purposes; instantaneous or storage water heaters, non-electric.
- Instantaneous or storage water heaters, non-electric: - Instantaneous gas water heaters - Other | NMB | 6.5% | CCCT, LDCT |
| 8419.19.00 | | Machinery, plant or laboratory equipment, whether or not electrically heated (excluding furnaces, ovens and other equipment of heading 85.14), for the treatment of materials by a process involving a change of temperature such as heating, cooking, roasting, distilling, rectifying, sterilizing, pasteurizing, steaming, drying, evaporating, vaporizing, condensing or cooling, other than machinery or plant of a kind used for domestic purposes; instantaneous or storage water heaters, non-electric.
- Instantaneous or storage water heaters, non-electric: - Other | NMB | 5% | CCCT, LDCT |
| 8419.19.00 | 10 | Machinery, plant or laboratory equipment, whether or not electrically heated (excluding furnaces, ovens and other equipment of heading 85.14), for the treatment of materials by a process involving a change of temperature such as heating, cooking, roasting, distilling, rectifying, sterilizing, pasteurizing, steaming, drying, evaporating, vaporizing, condensing or cooling, other than machinery or plant of a kind used for domestic purposes; instantaneous or storage water heaters, non-electric.
- Instantaneous or storage water heaters, non-electric: - Other - For domestic purposes | NMB | 5% | CCCT, LDCT |
| 8419.19.00 | 90 | Machinery, plant or laboratory equipment, whether or not electrically heated (excluding furnaces, ovens and other equipment of heading 85.14), for the treatment of materials by a process involving a change of temperature such as heating, cooking, roasting, distilling, rectifying, sterilizing, pasteurizing, steaming, drying, evaporating, vaporizing, condensing or cooling, other than machinery or plant of a kind used for domestic purposes; instantaneous or storage water heaters, non-electric.
- Instantaneous or storage water heaters, non-electric: - Other - Other | NMB | 5% | CCCT, LDCT |
| 7325.99.10 | 00 | Other cast articles of iron or steel. - Other: - Other - The following, to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells or potash or rock salt deposits:
Flanged casing heads;
Screwed casing heads for surface casings of an external diameter exceeding 273 mm, or rated for service in working pressures exceeding 14 MPa W.O.G. (water, oil, gas) | KGM | Free | CCCT, LDCT |
| 7326.19.10 | 00 | Other articles of iron or steel. - Forged or stamped, but not further worked: - Other - Flanged wellhead tubing heads and flanged casing head spools, in the rough, for use in the manufacture of wellhead tubing heads or casing head spools, rated for service in working pressures exceeding 14 MPa W.O.G. (water, oil, gas), to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells;
Wick sustainers for use in the manufacture of candles | KGM | Free | CCCT, LDCT |
| 7326.90.10 | | Other articles of iron or steel. - Other - Couplings for sucker rods, pony rods or polished rods for oilfield related pumps;Fishing tools and parts thereof to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells or for drilling machinery employed in the exploration, discovery, development or operation of potash or rock salt deposits;For climbing or mountaineering;For keeping nets open and swivels, to be employed in commercial fishing or in the commercial harvesting of marine plants;For use in the manufacture of detectors for propane or other toxic fumes;For use in the manufacture of fire fighting vehicles;For use in the manufacture of goods of Section XVI or of Chapter 73, such goods being used in the recovery or production of crude oil from shales, oil-sands or tar-sands;For use in the manufacture or repair of engines or parts thereof for commercial fishing vessels;Forged steel clevis hooks and eye hooks for use in the manufacture of debris chutes;Identification bands for migratory birds;Pitless well heads and parts thereof;Reusable containers, specially designed to be employed in the transportation of motor vehicle components which are free of customs duties, presented with the goods therein;Seat post clamps and cable hangers for use in the manufacture of unicycles, bicycles or tricycles;Semi-elliptical heads, of an external diameter of either 609.6 mm or 762 mm, to specification ASTM A455, for use in air compressor tanks;Snap hooks of forged steel, zinc plated, 12.5 cm to 23 cm in length, for use in the manufacture of debris chutes and chute hoists;Steel stanchions for confining livestock either in pens or individually;The following to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells or potash or rock salt deposits:Flanged casing heads;Screwed casing heads for surface casings of an external diameter exceeding 273 mm, or rated for service in working pressures exceeding 14 MPa W.O.G. (water, oil, gas);Well packers and parts thereof;To be employed in the processing, storing or insemination of animal semen;Tracks for use in the manufacture of skid steer loaders;Vacuum evaporator masks, of stainless steel, having a 90% front etch and 10% back etch, for the production of photo cells;Wick sustainers for use in the manufacture of candles | - | Free | CCCT, LDCT |
| 7326.90.10 | 10 | Other articles of iron or steel. - Other - Couplings for sucker rods, pony rods or polished rods for oilfield related pumps;Fishing tools and parts thereof to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells or for drilling machinery employed in the exploration, discovery, development or operation of potash or rock salt deposits;For climbing or mountaineering;For keeping nets open and swivels, to be employed in commercial fishing or in the commercial harvesting of marine plants;For use in the manufacture of detectors for propane or other toxic fumes;For use in the manufacture of fire fighting vehicles;For use in the manufacture of goods of Section XVI or of Chapter 73, such goods being used in the recovery or production of crude oil from shales, oil-sands or tar-sands;For use in the manufacture or repair of engines or parts thereof for commercial fishing vessels;Forged steel clevis hooks and eye hooks for use in the manufacture of debris chutes;Identification bands for migratory birds;Pitless well heads and parts thereof;Reusable containers, specially designed to be employed in the transportation of motor vehicle components which are free of customs duties, presented with the goods therein;Seat post clamps and cable hangers for use in the manufacture of unicycles, bicycles or tricycles;Semi-elliptical heads, of an external diameter of either 609.6 mm or 762 mm, to specification ASTM A455, for use in air compressor tanks;Snap hooks of forged steel, zinc plated, 12.5 cm to 23 cm in length, for use in the manufacture of debris chutes and chute hoists;Steel stanchions for confining livestock either in pens or individually;The following to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells or potash or rock salt deposits:Flanged casing heads;Screwed casing heads for surface casings of an external diameter exceeding 273 mm, or rated for service in working pressures exceeding 14 MPa W.O.G. (water, oil, gas);Well packers and parts thereof;To be employed in the processing, storing or insemination of animal semen;Tracks for use in the manufacture of skid steer loaders;Vacuum evaporator masks, of stainless steel, having a 90% front etch and 10% back etch, for the production of photo cells;Wick sustainers for use in the manufacture of candles
- Steel stanchions, for confining livestock either in pens or individually | - | | |
| 7326.90.10 | 20 | Other articles of iron or steel. - Other - Couplings for sucker rods, pony rods or polished rods for oilfield related pumps;Fishing tools and parts thereof to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells or for drilling machinery employed in the exploration, discovery, development or operation of potash or rock salt deposits;For climbing or mountaineering;For keeping nets open and swivels, to be employed in commercial fishing or in the commercial harvesting of marine plants;For use in the manufacture of detectors for propane or other toxic fumes;For use in the manufacture of fire fighting vehicles;For use in the manufacture of goods of Section XVI or of Chapter 73, such goods being used in the recovery or production of crude oil from shales, oil-sands or tar-sands;For use in the manufacture or repair of engines or parts thereof for commercial fishing vessels;Forged steel clevis hooks and eye hooks for use in the manufacture of debris chutes;Identification bands for migratory birds;Pitless well heads and parts thereof;Reusable containers, specially designed to be employed in the transportation of motor vehicle components which are free of customs duties, presented with the goods therein;Seat post clamps and cable hangers for use in the manufacture of unicycles, bicycles or tricycles;Semi-elliptical heads, of an external diameter of either 609.6 mm or 762 mm, to specification ASTM A455, for use in air compressor tanks;Snap hooks of forged steel, zinc plated, 12.5 cm to 23 cm in length, for use in the manufacture of debris chutes and chute hoists;Steel stanchions for confining livestock either in pens or individually;The following to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells or potash or rock salt deposits:Flanged casing heads;Screwed casing heads for surface casings of an external diameter exceeding 273 mm, or rated for service in working pressures exceeding 14 MPa W.O.G. (water, oil, gas);Well packers and parts thereof;To be employed in the processing, storing or insemination of animal semen;Tracks for use in the manufacture of skid steer loaders;Vacuum evaporator masks, of stainless steel, having a 90% front etch and 10% back etch, for the production of photo cells;Wick sustainers for use in the manufacture of candles
- Identification bands for migratory birds | - | | |
| 7326.90.10 | 30 | Other articles of iron or steel. - Other - Couplings for sucker rods, pony rods or polished rods for oilfield related pumps;Fishing tools and parts thereof to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells or for drilling machinery employed in the exploration, discovery, development or operation of potash or rock salt deposits;For climbing or mountaineering;For keeping nets open and swivels, to be employed in commercial fishing or in the commercial harvesting of marine plants;For use in the manufacture of detectors for propane or other toxic fumes;For use in the manufacture of fire fighting vehicles;For use in the manufacture of goods of Section XVI or of Chapter 73, such goods being used in the recovery or production of crude oil from shales, oil-sands or tar-sands;For use in the manufacture or repair of engines or parts thereof for commercial fishing vessels;Forged steel clevis hooks and eye hooks for use in the manufacture of debris chutes;Identification bands for migratory birds;Pitless well heads and parts thereof;Reusable containers, specially designed to be employed in the transportation of motor vehicle components which are free of customs duties, presented with the goods therein;Seat post clamps and cable hangers for use in the manufacture of unicycles, bicycles or tricycles;Semi-elliptical heads, of an external diameter of either 609.6 mm or 762 mm, to specification ASTM A455, for use in air compressor tanks;Snap hooks of forged steel, zinc plated, 12.5 cm to 23 cm in length, for use in the manufacture of debris chutes and chute hoists;Steel stanchions for confining livestock either in pens or individually;The following to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells or potash or rock salt deposits:Flanged casing heads;Screwed casing heads for surface casings of an external diameter exceeding 273 mm, or rated for service in working pressures exceeding 14 MPa W.O.G. (water, oil, gas);Well packers and parts thereof;To be employed in the processing, storing or insemination of animal semen;Tracks for use in the manufacture of skid steer loaders;Vacuum evaporator masks, of stainless steel, having a 90% front etch and 10% back etch, for the production of photo cells;Wick sustainers for use in the manufacture of candles
- The following, to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells or potash or rock salt deposits: Flanged casing heads; Screwed casing heads, for surface casings, of an external diameter exceeding 273 mm, or rated for service in working pressures exceeding 14 MPa W.O.G. (water, oil, gas); Well packers and parts thereof | - | | |
Harmonized Tariff Schedule of the Canada inquiry: aircraft+parts
