| 7607.19.00 | 10 | Aluminum foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0.2 mm. - Not backed: - Other - Epoxy coated, for use in the manufacture of peelable, retortable lids, for food containers; Etched, for use in the manufacture of electrolytic capacitors; In rolls, for use in the manufacture of smooth wall containers of subheading 7612.90; One side bright and one side matte, "A wettable", of a thickness of 18 microns or more but not exceeding 61 microns, in rolls having a width of 1.225 mm or more but not exceeding 1.520 mm, for use in the manufacture of lidding stock and pouch stock | KGM | Free | CCCT, LDCT |
| 7607.20.10 | 00 | Aluminum foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0.2 mm. - Backed - For use in the manufacture of 960 ml beverage containers;
Of a thickness of less than 0.127 mm, embossed, not printed | KGM | Free | CCCT, LDCT |
| 8408.20.00 | 10 | Compression-ignition internal combustion piston engines (diesel or semi-diesel engines). - Engines of a kind used for the propulsion of vehicles of Chapter 87
- Of the tractors of classification No. 8701.10.10.00, 8701.30.00.11, 8701.30.00.12, 8701.30.00.13, 8701.30.00.14, 8701.30.00.15, 8701.90.90.21, 8701.90.90.22, 8701.90.90.23, 8701.90.90.24, 8701.90.90.25 or 8701.90.90.26 | NMB | Free | CCCT, LDCT |
| 8411.82.10 | 00 | Turbo-jets, turbo-propellers and other gas turbines. - Other gas turbines: - Of a power exceeding 5,000 kW - Of a power exceeding 44,742 kW, to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of water, oil or natural gas wells, in mining or quarrying, or in the distillation or recovery of products from natural gas;
Of a power of 12,682 kW or more but not exceeding 14,547 kW, for use in the manufacture of compressor sets | NMB | Free | CCCT, LDCT |
| 8411.82.20 | 00 | Turbo-jets, turbo-propellers and other gas turbines. - Other gas turbines: - Of a power exceeding 5,000 kW - For use in the manufacture of generator sets;
Of a power of less than 12,682 kW or exceeding 14,547 kW but not exceeding 20,000 kW, for use in the manufacture of compressor sets | NMB | Free | CCCT, LDCT |
| 8412.90.00 | 20 | Other engines and motors. - Parts - Of the goods of classification No. 8412.29.00.10 or 8412.39.00.10: - Of the other engines and motors, to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of water, oil or natural gas wells, in mining or quarrying, or in the distillation or recovery of products from natural gas | - | Free | CCCT, LDCT |
| 8414.51 | | Air or vacuum pumps, air or other gas compressors and fans; ventilating or recycling hoods incorporating a fan, whether or not fitted with filters. - Fans: - Table, floor, wall, window, ceiling or roof fans, with a self-contained electric motor of an output not exceeding 125 W | | | |
| 8414.51.10 | 00 | Air or vacuum pumps, air or other gas compressors and fans; ventilating or recycling hoods incorporating a fan, whether or not fitted with filters. - Fans: - Table, floor, wall, window, ceiling or roof fans, with a self-contained electric motor of an output not exceeding 125 W - Personal fans, mains powered;Table fans, single or variable speed, oscillating | NMB | 8% | CCCT, LDCT |
| 8414.51.90 | | Air or vacuum pumps, air or other gas compressors and fans; ventilating or recycling hoods incorporating a fan, whether or not fitted with filters. - Fans: - Table, floor, wall, window, ceiling or roof fans, with a self-contained electric motor of an output not exceeding 125 W - Other | NMB | Free | CCCT, LDCT |
| 8414.51.90 | 10 | Air or vacuum pumps, air or other gas compressors and fans; ventilating or recycling hoods incorporating a fan, whether or not fitted with filters. - Fans: - Table, floor, wall, window, ceiling or roof fans, with a self-contained electric motor of an output not exceeding 125 W - Other - Floor fans | NMB | Free | CCCT, LDCT |
| 8414.51.90 | 20 | Air or vacuum pumps, air or other gas compressors and fans; ventilating or recycling hoods incorporating a fan, whether or not fitted with filters. - Fans: - Table, floor, wall, window, ceiling or roof fans, with a self-contained electric motor of an output not exceeding 125 W - Other - Ceiling or roof fans | NMB | Free | CCCT, LDCT |
| 8414.51.90 | 90 | Air or vacuum pumps, air or other gas compressors and fans; ventilating or recycling hoods incorporating a fan, whether or not fitted with filters. - Fans: - Table, floor, wall, window, ceiling or roof fans, with a self-contained electric motor of an output not exceeding 125 W - Other - Other | NMB | Free | CCCT, LDCT |
| 8414.60.00 | 00 | Air or vacuum pumps, air or other gas compressors and fans; ventilating or recycling hoods incorporating a fan, whether or not fitted with filters. - Hoods having a maximum horizontal side not exceeding 120 cm | NMB | 6% | CCCT, LDCT |
| 8414.90.90 | 40 | Air or vacuum pumps, air or other gas compressors and fans; ventilating or recycling hoods incorporating a fan, whether or not fitted with filters. - Parts - Other - Of fans, for table, floor, wall, window, ceiling or roof, with a self-contained electric motor of an output not exceeding 125 W | - | Free | CCCT, LDCT |
| 8414.90.90 | 60 | Air or vacuum pumps, air or other gas compressors and fans; ventilating or recycling hoods incorporating a fan, whether or not fitted with filters. - Parts - Other - Of the goods of tariff item No. 8414.30.00: - Of hoods, having a maximum horizontal side not exceeding 120 cm | - | Free | CCCT, LDCT |
| 98.25 | | Goods imported by mail or courier for personal or household use.
The following goods are not eligible for classification under this heading: goods or classes of goods that, on importation, may be released only in accordance with the accounting provisions of the Customs Act or the applicable regulations on condition that the importer or owner of the goods provides, before the release of the goods, any certificate, licence, permit or other document and any information that is required under any Act of Parliament or any regulation made under such an Act that prohibits, controls or regulates the importation of goods, but this exclusion from eligibility for classification does not apply to any goods imported under the authority of and in accordance with a general import permit issued under subsection 8(1.1) or section 8.3 of the Export and Import Permits Act.
The value of goods imported that are eligible to be classified under this heading shall not exceed $500.
The following goods are not eligible for classification under tariff item No. 9825.10.00, 9825.20.00 or 9825.30.00: alcoholic beverages; tobacco; tobacco products; goods subject to any additional customs duty under sections 21.1 to 22 of this Act; goods subject to any tax imposed under subsection 23(1) of the Excise Tax Act; goods in respect of which tax is not payable under Division III of Part IX of that Act; and goods in respect of which tax is payable under section 212.1 of that Act if an amount must be deducted from that tax under section 214.1 of that Act. | | | |
| 9825.10.00 | | Goods imported by mail or courier for personal or household use.
The following goods are not eligible for classification under this heading: goods or classes of goods that, on importation, may be released only in accordance with the accounting provisions of the Customs Act or the applicable regulations on condition that the importer or owner of the goods provides, before the release of the goods, any certificate, licence, permit or other document and any information that is required under any Act of Parliament or any regulation made under such an Act that prohibits, controls or regulates the importation of goods, but this exclusion from eligibility for classification does not apply to any goods imported under the authority of and in accordance with a general import permit issued under subsection 8(1.1) or section 8.3 of the Export and Import Permits Act.
The value of goods imported that are eligible to be classified under this heading shall not exceed $500.
The following goods are not eligible for classification under tariff item No. 9825.10.00, 9825.20.00 or 9825.30.00: alcoholic beverages; tobacco; tobacco products; goods subject to any additional customs duty under sections 21.1 to 22 of this Act; goods subject to any tax imposed under subsection 23(1) of the Excise Tax Act; goods in respect of which tax is not payable under Division III of Part IX of that Act; and goods in respect of which tax is payable under section 212.1 of that Act if an amount must be deducted from that tax under section 214.1 of that Act. - Goods which, if classified in accordance with the provisions of Chapters 1 to 97, would be subject to a rate of customs duty under the Most-Favoured-Nation Tariff that is not more than 5 percentage points greater or less than the rate provided by this tariff item under the Most-Favoured-Nation Tariff. | | 20% | UST, MT, M |
| 8429.51.00 | 11 | Self-propelled bulldozers, angledozers, graders, levellers, scrapers, mechanical shovels, excavators, shovel loaders, tamping machines and road rollers. - Mechanical shovels, excavators and shovel loaders: - Front-end shovel loaders - Wheeled front-end loaders, designed to be fitted with a bucket, having a capacity, for general purpose use, exceeding 12.3 m³: - New, 2 wheel drive, rear engine mounted | NMB | Free | CCCT, LDCT |
| 8429.51.00 | 12 | Self-propelled bulldozers, angledozers, graders, levellers, scrapers, mechanical shovels, excavators, shovel loaders, tamping machines and road rollers. - Mechanical shovels, excavators and shovel loaders: - Front-end shovel loaders - Wheeled front-end loaders, designed to be fitted with a bucket, having a capacity, for general purpose use, exceeding 12.3 m³: - New, 4 wheel drive, rear engine mounted | NMB | Free | CCCT, LDCT |
| 8429.51.00 | 13 | Self-propelled bulldozers, angledozers, graders, levellers, scrapers, mechanical shovels, excavators, shovel loaders, tamping machines and road rollers. - Mechanical shovels, excavators and shovel loaders: - Front-end shovel loaders - Wheeled front-end loaders, designed to be fitted with a bucket, having a capacity, for general purpose use, exceeding 12.3 m³: - Used or rebuilt | NMB | Free | CCCT, LDCT |
| 8429.51.00 | 19 | Self-propelled bulldozers, angledozers, graders, levellers, scrapers, mechanical shovels, excavators, shovel loaders, tamping machines and road rollers. - Mechanical shovels, excavators and shovel loaders: - Front-end shovel loaders - Wheeled front-end loaders, designed to be fitted with a bucket, having a capacity, for general purpose use, exceeding 12.3 m³: - Other | NMB | Free | CCCT, LDCT |
| 8429.51.00 | 20 | Self-propelled bulldozers, angledozers, graders, levellers, scrapers, mechanical shovels, excavators, shovel loaders, tamping machines and road rollers. - Mechanical shovels, excavators and shovel loaders: - Front-end shovel loaders - Wheeled front-end loaders, designed to be fitted with a bucket, having a capacity, for general purpose use, not exceeding 12.3 m³, used or rebuilt | NMB | Free | CCCT, LDCT |
| 8429.51.00 | 30 | Self-propelled bulldozers, angledozers, graders, levellers, scrapers, mechanical shovels, excavators, shovel loaders, tamping machines and road rollers. - Mechanical shovels, excavators and shovel loaders: - Front-end shovel loaders - Wheeled front-end loaders, designed to be fitted with a bucket, having a capacity, for general purpose use, not exceeding 12.3 m³, new, two wheel drive, rear engine mounted | NMB | Free | CCCT, LDCT |
| 8429.51.00 | 41 | Self-propelled bulldozers, angledozers, graders, levellers, scrapers, mechanical shovels, excavators, shovel loaders, tamping machines and road rollers. - Mechanical shovels, excavators and shovel loaders: - Front-end shovel loaders - Wheeled front-end loaders, designed to be fitted with a bucket, having a capacity, for general purpose use, not exceeding 12.3 m³, new, four wheel drive, rear engine mounted, with a bucket capacity of: - Less than 1.5 m³ | NMB | Free | CCCT, LDCT |
| 8429.51.00 | 42 | Self-propelled bulldozers, angledozers, graders, levellers, scrapers, mechanical shovels, excavators, shovel loaders, tamping machines and road rollers. - Mechanical shovels, excavators and shovel loaders: - Front-end shovel loaders - Wheeled front-end loaders, designed to be fitted with a bucket, having a capacity, for general purpose use, not exceeding 12.3 m³, new, four wheel drive, rear engine mounted, with a bucket capacity of: - 1.5 m³ or more but less than 2.2 m³ | NMB | Free | CCCT, LDCT |
Harmonized Tariff Schedule of the Canada inquiry: aircraft+parts
