| 8462.91.91 | 00 | Machine-tools (including presses) for working metal by forging, hammering or die-stamping; machine-tools (including presses) for working metal by bending, folding, straightening, flattening, shearing, punching or notching; presses for working metal or metal carbides, not specified above. - Other: - Hydraulic presses - Other: - Bulldozer presses;
Extrusion presses;
Fine blanking presses with mechanical ram drive;
Horizontal high pressure extrusion presses;
Metal stamping presses, with a capacity of 100 tonnes or more but not exceeding 2,500 tonnes and a width of 56 cm or more but not exceeding 620 cm;
Trim presses | NMB | Free | CCCT, LDCT |
| 8477.90.10 | 10 | Machinery for working rubber or plastics or for the manufacture of products from these materials, not specified or included elsewhere in this Chapter. - Parts - Base, bed, platen, clamp cylinder, ram and injection castings, weldments and fabrications - Of the goods of tariff item No. 8477.10.10, 8477.30.00, 8477.40.00, 8477.51.11, 8477.51.19, 8477.59.21 or 8477.59.29 or of classification No. 8477.10.90.11, 8477.10.90.20, 8477.20.90.11, 8477.20.90.19 or 8477.80.10.10: - For injection moulding machines | - | Free | CCCT, LDCT |
| 8477.90.20 | 20 | Machinery for working rubber or plastics or for the manufacture of products from these materials, not specified or included elsewhere in this Chapter. - Parts - Barrel screws - Of the goods of tariff item No. 8477.51.21, 8477.51.29, 8477.59.11, 8477.59.19, 8477.80.10, 8477.80.91 or 8477.80.99 or of classification No. 8477.10.90.19, 8477.20.90.21, 8477.20.90.29, 8477.20.90.31, 8477.20.90.39, 8477.20.90.91, 8477.20.90.99 or 8477.40.00.20: - For extruders | - | Free | CCCT, LDCT |
| 8477.90.90 | 10 | Machinery for working rubber or plastics or for the manufacture of products from these materials, not specified or included elsewhere in this Chapter. - Parts - Other - Of the goods of tariff item No. 8477.10.10, 8477.30.00, 8477.40.00, 8477.51.11, 8477.51.19, 8477.59.21 or 8477.59.29 or of classification No. 8477.10.90.11, 8477.10.90.20, 8477.20.90.11, 8477.20.90.19 or 8477.80.10.10: - For injection moulding machines | - | Free | CCCT, LDCT |
| 8477.90.90 | 20 | Machinery for working rubber or plastics or for the manufacture of products from these materials, not specified or included elsewhere in this Chapter. - Parts - Other - Of the goods of tariff item No. 8477.51.21, 8477.51.29, 8477.59.11, 8477.59.19, 8477.80.10, 8477.80.91 or 8477.80.99 or of classification No. 8477.10.90.19, 8477.20.90.21, 8477.20.90.29, 8477.20.90.31, 8477.20.90.39, 8477.20.90.91, 8477.20.90.99 or 8477.40.00.20: - For extruders | - | Free | CCCT, LDCT |
| 8482.99.11 | 00 | Ball or roller bearings. - Parts: - Other - Inner or outer races or rings: - For the goods of tariff item No. 8482.10.10 or 8482.20.00 | - | Free | CCCT, LDCT |
| 8501.32.10 | 00 | Electric motors and generators (excluding generating sets). - Other DC motors; DC generators: - Of an output exceeding 750 W but not exceeding 75 kW - Actuators;
Brushless geared shaft motors for use in electrical hand tools;
Gear motors for use in the manufacture of machinery or equipment;
Motors for use in the manufacture of lifts (elevators);
Motors of a voltage of 20 V or more but not exceeding 75 V, for use in the manufacture of fork-lift trucks | NMB | Free | CCCT, LDCT |
| 8501.40.00 | 10 | Electric motors and generators (excluding generating sets). - Other AC motors, single-phase - External rotor permanent split capacitor motors, of a power exceeding 30 W or more but not exceeding 120 W, for use in the manufacture of cooker (range) hoods; Gear motors, for use in the manufacture of machinery or equipment; Other motors, for use in the manufacture of submersible water pump systems, with a pump diameter exceeding 8.89 cm | NMB | Free | CCCT, LDCT |
| 8503.00.90 | 10 | Parts suitable for use solely or principally with the machines of heading 85.01 or 85.02.
- Other - Of the machines of tariff item No. 8501.31.30, 8501.40.10, 8501.40.22 or 8501.40.29 or of classification No. 8501.20.90.10, 8501.40.21.91, 8501.40.21.92, 8501.51.10.30 or 8501.51.90.90: - Of gear motors | - | Free | CCCT, LDCT |
| 8503.00.90 | 20 | Parts suitable for use solely or principally with the machines of heading 85.01 or 85.02.
- Other - Of the machines of tariff item No. 8501.34.30, 8501.63.90, 8501.64.91 or 8501.64.99 or of classification No. 8501.33.20.12, 8501.62.10.20 or 8501.62.90.20: - Of motors, excluding gear motors | - | Free | CCCT, LDCT |
| 8503.00.90 | 30 | Parts suitable for use solely or principally with the machines of heading 85.01 or 85.02.
- Other - Of the machines of tariff item No. 8501.61.90 or classification No. 8501.31.20.10, 8501.33.20.11 or 8501.62.90.10: - Of generators, excluding generating sets | - | Free | CCCT, LDCT |
| 8508.11.00 | 00 | Vacuum cleaners. - With self-contained electric motor: - Of a power not exceeding 1,500 W and having a dust bag or other receptacle capacity not exceeding 20 litres | NMB | 8% | CCCT, LDCT |
| 9825.20 | | Goods imported by mail or courier for personal or household use.
The following goods are not eligible for classification under this heading: goods or classes of goods that, on importation, may be released only in accordance with the accounting provisions of the Customs Act or the applicable regulations on condition that the importer or owner of the goods provides, before the release of the goods, any certificate, licence, permit or other document and any information that is required under any Act of Parliament or any regulation made under such an Act that prohibits, controls or regulates the importation of goods, but this exclusion from eligibility for classification does not apply to any goods imported under the authority of and in accordance with a general import permit issued under subsection 8(1.1) or section 8.3 of the Export and Import Permits Act.
The value of goods imported that are eligible to be classified under this heading shall not exceed $500.
The following goods are not eligible for classification under tariff item No. 9825.10.00, 9825.20.00 or 9825.30.00: alcoholic beverages; tobacco; tobacco products; goods subject to any additional customs duty under sections 21.1 to 22 of this Act; goods subject to any tax imposed under subsection 23(1) of the Excise Tax Act; goods in respect of which tax is not payable under Division III of Part IX of that Act; and goods in respect of which tax is payable under section 212.1 of that Act if an amount must be deducted from that tax under section 214.1 of that Act. - Goods which, if classified in accordance with the provisions of Chapters 1 to 97, would be subject to a rate of customs duty under the Most-Favoured-Nation Tariff that is not more than 5 percentage points greater or less than the rate provided by this tariff item under the Most-Favoured-Nation Tariff. | | | |
| 8518.90.10 | | Microphones and stands therefor; loudspeakers, whether or not mounted in their enclosures; headphones and earphones, whether or not combined with a microphone, and sets consisting of a microphone and one or more loudspeakers; audio-frequency electric amplifiers; electric sound amplifier sets. - Parts - Cone housings, field cases and pole pieces, for speakers with mounting dimensions exceeding 203 mm, cones and cone surrounds, dust covers and spiders, for use in the manufacture of loudspeakers;
Of compression horn drivers or compression horn tweeters for use in the manufacture of speaker systems;
Of loudspeakers, without housings, having a frequency range of 300 Hz to 3.4 KHz and with a diameter not exceeding 50 mm, for telecommunications use;
Of microphones, stands therefor, and headphones (including earphones) | - | Free | CCCT, LDCT |
| 8518.90.10 | 10 | Microphones and stands therefor; loudspeakers, whether or not mounted in their enclosures; headphones and earphones, whether or not combined with a microphone, and sets consisting of a microphone and one or more loudspeakers; audio-frequency electric amplifiers; electric sound amplifier sets. - Parts - Cone housings, field cases and pole pieces, for speakers with mounting dimensions exceeding 203 mm, cones and cone surrounds, dust covers and spiders, for use in the manufacture of loudspeakers;
Of compression horn drivers or compression horn tweeters for use in the manufacture of speaker systems;
Of loudspeakers, without housings, having a frequency range of 300 Hz to 3.4 KHz and with a diameter not exceeding 50 mm, for telecommunications use;
Of microphones, stands therefor, and headphones (including earphones) - Of microphones and stands therefor | - | Free | CCCT, LDCT |
| 8533.21.00 | 00 | Electrical resistors (including rheostats and potentiometers), other than heating resistors. - Other fixed resistors: - For a power handling capacity not exceeding 20 W | - | Free | CCCT, LDCT |
| 8533.31.00 | 00 | Electrical resistors (including rheostats and potentiometers), other than heating resistors. - Wirewound variable resistors, including rheostats and potentiometers: - For a power handling capacity not exceeding 20 W | - | Free | CCCT, LDCT |
| 8539.22 | | Electric filament or discharge lamps, including sealed beam lamp units and ultra-violet or infra-red lamps; arc-lamps. - Other filament lamps, excluding ultra-violet or infra-red lamps: - Other, of a power not exceeding 200 W and for a voltage exceeding 100 V | | | |
| 8539.22.10 | 00 | Electric filament or discharge lamps, including sealed beam lamp units and ultra-violet or infra-red lamps; arc-lamps. - Other filament lamps, excluding ultra-violet or infra-red lamps: - Other, of a power not exceeding 200 W and for a voltage exceeding 100 V - For use in the manufacture of Christmas lighting sets or patio lighting sets | NMB | Free | CCCT, LDCT |
| 8539.22.90 | | Electric filament or discharge lamps, including sealed beam lamp units and ultra-violet or infra-red lamps; arc-lamps. - Other filament lamps, excluding ultra-violet or infra-red lamps: - Other, of a power not exceeding 200 W and for a voltage exceeding 100 V - Other | NMB | 8% | CCCT, LDCT |
| 8539.22.90 | 10 | Electric filament or discharge lamps, including sealed beam lamp units and ultra-violet or infra-red lamps; arc-lamps. - Other filament lamps, excluding ultra-violet or infra-red lamps: - Other, of a power not exceeding 200 W and for a voltage exceeding 100 V - Other - Standard household, of a power of 40 to 100 watts | NMB | 8% | CCCT, LDCT |
| 8539.22.90 | 90 | Electric filament or discharge lamps, including sealed beam lamp units and ultra-violet or infra-red lamps; arc-lamps. - Other filament lamps, excluding ultra-violet or infra-red lamps: - Other, of a power not exceeding 200 W and for a voltage exceeding 100 V - Other - Other | NMB | 8% | CCCT, LDCT |
| 8539.32.10 | 00 | Electric filament or discharge lamps, including sealed beam lamp units and ultra-violet or infra-red lamps; arc-lamps. - Discharge lamps, other than ultra-violet lamps: - Mercury or sodium vapour lamps; metal halide lamps - For use in measuring, checking or testing instruments of Chapter 90, or for use in electrically operated apparatus for indicating intervals of time;High pressure (190-200 atmospheres), 100W to 300W mercury discharge lamps with arc gaps from 1.0mm to 1.3mm, mounted within a parabolic or elliptical dichroic glass reflector, and with a luminious efficiency of 60 (+/- 5) lumens per watt, for use in Canadian manufactures | NMB | Free | CCCT, LDCT |
| 8541.60.00 | 10 | Diodes, transistors and similar semiconductor devices; photosensitive semiconductor devices, including photovoltaic cells whether or not assembled in modules or made up into panels; light emitting diodes; mounted piezo-electric crystals. - Mounted piezo-electric crystals - Quartz, designed for operating frequencies not exceeding 20 MHz | NMB | Free | CCCT, LDCT |
| 8541.60.00 | 20 | Diodes, transistors and similar semiconductor devices; photosensitive semiconductor devices, including photovoltaic cells whether or not assembled in modules or made up into panels; light emitting diodes; mounted piezo-electric crystals. - Mounted piezo-electric crystals - Quartz, designed for operating frequencies exceeding 20 MHz | NMB | Free | CCCT, LDCT |
Harmonized Tariff Schedule of the Canada inquiry: aircraft+parts
