Home|Add to Favorites|Add to My Toolkit
International Trade|Register|Sign in|Customization
  86/134         
Sharing buttons for facebookSharing buttons for twitterSharing buttons for Google plus
HS Code and Harmonized Tariff Schedule of Canada
HS NoSS Description of Goods Unit of Meas.  MFN Tariff Applicable Preferential Tariffs
7323.93.0020Table, kitchen or other household articles and parts thereof, of iron or steel; iron or steel wool; pot scourers and scouring or polishing pads, gloves and the like, of iron or steel. - Other: - Of stainless steel - TraysNMB  
7323.93.0030Table, kitchen or other household articles and parts thereof, of iron or steel; iron or steel wool; pot scourers and scouring or polishing pads, gloves and the like, of iron or steel. - Other: - Of stainless steel - Mixing bowlsNMB  
7323.93.0040Table, kitchen or other household articles and parts thereof, of iron or steel; iron or steel wool; pot scourers and scouring or polishing pads, gloves and the like, of iron or steel. - Other: - Of stainless steel - Bread boxes, canisters or cookie jarsNMB  
7323.93.0090Table, kitchen or other household articles and parts thereof, of iron or steel; iron or steel wool; pot scourers and scouring or polishing pads, gloves and the like, of iron or steel. - Other: - Of stainless steel - OtherNMB  
7323.94.00 Table, kitchen or other household articles and parts thereof, of iron or steel; iron or steel wool; pot scourers and scouring or polishing pads, gloves and the like, of iron or steel. - Other: - Of iron (other than cast iron) or steel, enamelledNMB6.5%CCCT, LDCT
7323.94.0010Table, kitchen or other household articles and parts thereof, of iron or steel; iron or steel wool; pot scourers and scouring or polishing pads, gloves and the like, of iron or steel. - Other: - Of iron (other than cast iron) or steel, enamelled - Cooking utensilsNMB  
7323.94.0020Table, kitchen or other household articles and parts thereof, of iron or steel; iron or steel wool; pot scourers and scouring or polishing pads, gloves and the like, of iron or steel. - Other: - Of iron (other than cast iron) or steel, enamelled - TraysNMB  
7323.94.0030Table, kitchen or other household articles and parts thereof, of iron or steel; iron or steel wool; pot scourers and scouring or polishing pads, gloves and the like, of iron or steel. - Other: - Of iron (other than cast iron) or steel, enamelled - Bread boxes, canisters or cookie jarsNMB  
7323.94.0080Table, kitchen or other household articles and parts thereof, of iron or steel; iron or steel wool; pot scourers and scouring or polishing pads, gloves and the like, of iron or steel. - Other: - Of iron (other than cast iron) or steel, enamelled - Other household baskets, boxes and cansNMB  
7323.94.0091Table, kitchen or other household articles and parts thereof, of iron or steel; iron or steel wool; pot scourers and scouring or polishing pads, gloves and the like, of iron or steel. - Other: - Of iron (other than cast iron) or steel, enamelled - Other: - Subject to customs duty based on excise dutyNMB  
7323.94.0099Table, kitchen or other household articles and parts thereof, of iron or steel; iron or steel wool; pot scourers and scouring or polishing pads, gloves and the like, of iron or steel. - Other: - Of iron (other than cast iron) or steel, enamelled - Other: - OtherNMB  
7323.99.0000Table, kitchen or other household articles and parts thereof, of iron or steel; iron or steel wool; pot scourers and scouring or polishing pads, gloves and the like, of iron or steel. - Other: - Other-6.5%CCCT, LDCT
7326.19.1000Other articles of iron or steel. - Forged or stamped, but not further worked: - Other - Flanged wellhead tubing heads and flanged casing head spools, in the rough, for use in the manufacture of wellhead tubing heads or casing head spools, rated for service in working pressures exceeding 14 MPa W.O.G. (water, oil, gas), to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells; Wick sustainers for use in the manufacture of candlesKGMFreeCCCT, LDCT
8418.91.1000Refrigerators, freezers and other refrigerating or freezing equipment, electric or other; heat pumps other than air conditioning machines of heading 84.15. - Parts: - Furniture designed to receive refrigerating or freezing equipment - For use in the manufacture of the goods of this heading; For the goods of tariff item No. 8418.10.10, 8418.10.90, 8418.21.00, 8418.29.00, 8418.30.10, 8418.30.90, 8418.40.10, 8418.40.90, 8418.50.10, 8418.50.29, 8418.61.00, 8418.69.20 or 8418.69.90-FreeCCCT, LDCT
7326.90.10 Other articles of iron or steel. - Other - Couplings for sucker rods, pony rods or polished rods for oilfield related pumps;Fishing tools and parts thereof to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells or for drilling machinery employed in the exploration, discovery, development or operation of potash or rock salt deposits;For climbing or mountaineering;For keeping nets open and swivels, to be employed in commercial fishing or in the commercial harvesting of marine plants;For use in the manufacture of detectors for propane or other toxic fumes;For use in the manufacture of fire fighting vehicles;For use in the manufacture of goods of Section XVI or of Chapter 73, such goods being used in the recovery or production of crude oil from shales, oil-sands or tar-sands;For use in the manufacture or repair of engines or parts thereof for commercial fishing vessels;Forged steel clevis hooks and eye hooks for use in the manufacture of debris chutes;Identification bands for migratory birds;Pitless well heads and parts thereof;Reusable containers, specially designed to be employed in the transportation of motor vehicle components which are free of customs duties, presented with the goods therein;Seat post clamps and cable hangers for use in the manufacture of unicycles, bicycles or tricycles;Semi-elliptical heads, of an external diameter of either 609.6 mm or 762 mm, to specification ASTM A455, for use in air compressor tanks;Snap hooks of forged steel, zinc plated, 12.5 cm to 23 cm in length, for use in the manufacture of debris chutes and chute hoists;Steel stanchions for confining livestock either in pens or individually;The following to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells or potash or rock salt deposits:Flanged casing heads;Screwed casing heads for surface casings of an external diameter exceeding 273 mm, or rated for service in working pressures exceeding 14 MPa W.O.G. (water, oil, gas);Well packers and parts thereof;To be employed in the processing, storing or insemination of animal semen;Tracks for use in the manufacture of skid steer loaders;Vacuum evaporator masks, of stainless steel, having a 90% front etch and 10% back etch, for the production of photo cells;Wick sustainers for use in the manufacture of candles-FreeCCCT, LDCT
7326.90.1010Other articles of iron or steel. - Other - Couplings for sucker rods, pony rods or polished rods for oilfield related pumps;Fishing tools and parts thereof to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells or for drilling machinery employed in the exploration, discovery, development or operation of potash or rock salt deposits;For climbing or mountaineering;For keeping nets open and swivels, to be employed in commercial fishing or in the commercial harvesting of marine plants;For use in the manufacture of detectors for propane or other toxic fumes;For use in the manufacture of fire fighting vehicles;For use in the manufacture of goods of Section XVI or of Chapter 73, such goods being used in the recovery or production of crude oil from shales, oil-sands or tar-sands;For use in the manufacture or repair of engines or parts thereof for commercial fishing vessels;Forged steel clevis hooks and eye hooks for use in the manufacture of debris chutes;Identification bands for migratory birds;Pitless well heads and parts thereof;Reusable containers, specially designed to be employed in the transportation of motor vehicle components which are free of customs duties, presented with the goods therein;Seat post clamps and cable hangers for use in the manufacture of unicycles, bicycles or tricycles;Semi-elliptical heads, of an external diameter of either 609.6 mm or 762 mm, to specification ASTM A455, for use in air compressor tanks;Snap hooks of forged steel, zinc plated, 12.5 cm to 23 cm in length, for use in the manufacture of debris chutes and chute hoists;Steel stanchions for confining livestock either in pens or individually;The following to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells or potash or rock salt deposits:Flanged casing heads;Screwed casing heads for surface casings of an external diameter exceeding 273 mm, or rated for service in working pressures exceeding 14 MPa W.O.G. (water, oil, gas);Well packers and parts thereof;To be employed in the processing, storing or insemination of animal semen;Tracks for use in the manufacture of skid steer loaders;Vacuum evaporator masks, of stainless steel, having a 90% front etch and 10% back etch, for the production of photo cells;Wick sustainers for use in the manufacture of candles - Steel stanchions, for confining livestock either in pens or individually-  
7326.90.1020Other articles of iron or steel. - Other - Couplings for sucker rods, pony rods or polished rods for oilfield related pumps;Fishing tools and parts thereof to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells or for drilling machinery employed in the exploration, discovery, development or operation of potash or rock salt deposits;For climbing or mountaineering;For keeping nets open and swivels, to be employed in commercial fishing or in the commercial harvesting of marine plants;For use in the manufacture of detectors for propane or other toxic fumes;For use in the manufacture of fire fighting vehicles;For use in the manufacture of goods of Section XVI or of Chapter 73, such goods being used in the recovery or production of crude oil from shales, oil-sands or tar-sands;For use in the manufacture or repair of engines or parts thereof for commercial fishing vessels;Forged steel clevis hooks and eye hooks for use in the manufacture of debris chutes;Identification bands for migratory birds;Pitless well heads and parts thereof;Reusable containers, specially designed to be employed in the transportation of motor vehicle components which are free of customs duties, presented with the goods therein;Seat post clamps and cable hangers for use in the manufacture of unicycles, bicycles or tricycles;Semi-elliptical heads, of an external diameter of either 609.6 mm or 762 mm, to specification ASTM A455, for use in air compressor tanks;Snap hooks of forged steel, zinc plated, 12.5 cm to 23 cm in length, for use in the manufacture of debris chutes and chute hoists;Steel stanchions for confining livestock either in pens or individually;The following to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells or potash or rock salt deposits:Flanged casing heads;Screwed casing heads for surface casings of an external diameter exceeding 273 mm, or rated for service in working pressures exceeding 14 MPa W.O.G. (water, oil, gas);Well packers and parts thereof;To be employed in the processing, storing or insemination of animal semen;Tracks for use in the manufacture of skid steer loaders;Vacuum evaporator masks, of stainless steel, having a 90% front etch and 10% back etch, for the production of photo cells;Wick sustainers for use in the manufacture of candles - Identification bands for migratory birds-  
7326.90.1030Other articles of iron or steel. - Other - Couplings for sucker rods, pony rods or polished rods for oilfield related pumps;Fishing tools and parts thereof to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells or for drilling machinery employed in the exploration, discovery, development or operation of potash or rock salt deposits;For climbing or mountaineering;For keeping nets open and swivels, to be employed in commercial fishing or in the commercial harvesting of marine plants;For use in the manufacture of detectors for propane or other toxic fumes;For use in the manufacture of fire fighting vehicles;For use in the manufacture of goods of Section XVI or of Chapter 73, such goods being used in the recovery or production of crude oil from shales, oil-sands or tar-sands;For use in the manufacture or repair of engines or parts thereof for commercial fishing vessels;Forged steel clevis hooks and eye hooks for use in the manufacture of debris chutes;Identification bands for migratory birds;Pitless well heads and parts thereof;Reusable containers, specially designed to be employed in the transportation of motor vehicle components which are free of customs duties, presented with the goods therein;Seat post clamps and cable hangers for use in the manufacture of unicycles, bicycles or tricycles;Semi-elliptical heads, of an external diameter of either 609.6 mm or 762 mm, to specification ASTM A455, for use in air compressor tanks;Snap hooks of forged steel, zinc plated, 12.5 cm to 23 cm in length, for use in the manufacture of debris chutes and chute hoists;Steel stanchions for confining livestock either in pens or individually;The following to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells or potash or rock salt deposits:Flanged casing heads;Screwed casing heads for surface casings of an external diameter exceeding 273 mm, or rated for service in working pressures exceeding 14 MPa W.O.G. (water, oil, gas);Well packers and parts thereof;To be employed in the processing, storing or insemination of animal semen;Tracks for use in the manufacture of skid steer loaders;Vacuum evaporator masks, of stainless steel, having a 90% front etch and 10% back etch, for the production of photo cells;Wick sustainers for use in the manufacture of candles - The following, to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells or potash or rock salt deposits: Flanged casing heads; Screwed casing heads, for surface casings, of an external diameter exceeding 273 mm, or rated for service in working pressures exceeding 14 MPa W.O.G. (water, oil, gas); Well packers and parts thereof-  
7407.21.1000Copper bars, rods and profiles. - Of copper alloys: - Of copper-zinc base alloys (brass) - Bars and rods, for use in the manufacture of welding electrodes, welding caps, electrode adaptors, electrode shanks, electrode holders, seam weld wheels or welding gunsKGMFreeCCCT, LDCT
7326.90.1040Other articles of iron or steel. - Other - Couplings for sucker rods, pony rods or polished rods for oilfield related pumps;Fishing tools and parts thereof to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells or for drilling machinery employed in the exploration, discovery, development or operation of potash or rock salt deposits;For climbing or mountaineering;For keeping nets open and swivels, to be employed in commercial fishing or in the commercial harvesting of marine plants;For use in the manufacture of detectors for propane or other toxic fumes;For use in the manufacture of fire fighting vehicles;For use in the manufacture of goods of Section XVI or of Chapter 73, such goods being used in the recovery or production of crude oil from shales, oil-sands or tar-sands;For use in the manufacture or repair of engines or parts thereof for commercial fishing vessels;Forged steel clevis hooks and eye hooks for use in the manufacture of debris chutes;Identification bands for migratory birds;Pitless well heads and parts thereof;Reusable containers, specially designed to be employed in the transportation of motor vehicle components which are free of customs duties, presented with the goods therein;Seat post clamps and cable hangers for use in the manufacture of unicycles, bicycles or tricycles;Semi-elliptical heads, of an external diameter of either 609.6 mm or 762 mm, to specification ASTM A455, for use in air compressor tanks;Snap hooks of forged steel, zinc plated, 12.5 cm to 23 cm in length, for use in the manufacture of debris chutes and chute hoists;Steel stanchions for confining livestock either in pens or individually;The following to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells or potash or rock salt deposits:Flanged casing heads;Screwed casing heads for surface casings of an external diameter exceeding 273 mm, or rated for service in working pressures exceeding 14 MPa W.O.G. (water, oil, gas);Well packers and parts thereof;To be employed in the processing, storing or insemination of animal semen;Tracks for use in the manufacture of skid steer loaders;Vacuum evaporator masks, of stainless steel, having a 90% front etch and 10% back etch, for the production of photo cells;Wick sustainers for use in the manufacture of candles - Pitless well heads and parts thereof-  
7326.90.1050Other articles of iron or steel. - Other - Couplings for sucker rods, pony rods or polished rods for oilfield related pumps;Fishing tools and parts thereof to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells or for drilling machinery employed in the exploration, discovery, development or operation of potash or rock salt deposits;For climbing or mountaineering;For keeping nets open and swivels, to be employed in commercial fishing or in the commercial harvesting of marine plants;For use in the manufacture of detectors for propane or other toxic fumes;For use in the manufacture of fire fighting vehicles;For use in the manufacture of goods of Section XVI or of Chapter 73, such goods being used in the recovery or production of crude oil from shales, oil-sands or tar-sands;For use in the manufacture or repair of engines or parts thereof for commercial fishing vessels;Forged steel clevis hooks and eye hooks for use in the manufacture of debris chutes;Identification bands for migratory birds;Pitless well heads and parts thereof;Reusable containers, specially designed to be employed in the transportation of motor vehicle components which are free of customs duties, presented with the goods therein;Seat post clamps and cable hangers for use in the manufacture of unicycles, bicycles or tricycles;Semi-elliptical heads, of an external diameter of either 609.6 mm or 762 mm, to specification ASTM A455, for use in air compressor tanks;Snap hooks of forged steel, zinc plated, 12.5 cm to 23 cm in length, for use in the manufacture of debris chutes and chute hoists;Steel stanchions for confining livestock either in pens or individually;The following to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells or potash or rock salt deposits:Flanged casing heads;Screwed casing heads for surface casings of an external diameter exceeding 273 mm, or rated for service in working pressures exceeding 14 MPa W.O.G. (water, oil, gas);Well packers and parts thereof;To be employed in the processing, storing or insemination of animal semen;Tracks for use in the manufacture of skid steer loaders;Vacuum evaporator masks, of stainless steel, having a 90% front etch and 10% back etch, for the production of photo cells;Wick sustainers for use in the manufacture of candles - Couplings for sucker rods, pony rods or polished rods for oilfield related pumps-  
8419.20.0020Machinery, plant or laboratory equipment, whether or not electrically heated (excluding furnaces, ovens and other equipment of heading 85.14), for the treatment of materials by a process involving a change of temperature such as heating, cooking, roasting, distilling, rectifying, sterilizing, pasteurizing, steaming, drying, evaporating, vaporizing, condensing or cooling, other than machinery or plant of a kind used for domestic purposes; instantaneous or storage water heaters, non-electric. - Medical, surgical or laboratory sterilizers - Laboratory sterilizersNMBFreeCCCT, LDCT
8419.31.0000Machinery, plant or laboratory equipment, whether or not electrically heated (excluding furnaces, ovens and other equipment of heading 85.14), for the treatment of materials by a process involving a change of temperature such as heating, cooking, roasting, distilling, rectifying, sterilizing, pasteurizing, steaming, drying, evaporating, vaporizing, condensing or cooling, other than machinery or plant of a kind used for domestic purposes; instantaneous or storage water heaters, non-electric. - Dryers: - For agricultural productsNMBFreeCCCT, LDCT
7326.90.1060Other articles of iron or steel. - Other - Couplings for sucker rods, pony rods or polished rods for oilfield related pumps;Fishing tools and parts thereof to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells or for drilling machinery employed in the exploration, discovery, development or operation of potash or rock salt deposits;For climbing or mountaineering;For keeping nets open and swivels, to be employed in commercial fishing or in the commercial harvesting of marine plants;For use in the manufacture of detectors for propane or other toxic fumes;For use in the manufacture of fire fighting vehicles;For use in the manufacture of goods of Section XVI or of Chapter 73, such goods being used in the recovery or production of crude oil from shales, oil-sands or tar-sands;For use in the manufacture or repair of engines or parts thereof for commercial fishing vessels;Forged steel clevis hooks and eye hooks for use in the manufacture of debris chutes;Identification bands for migratory birds;Pitless well heads and parts thereof;Reusable containers, specially designed to be employed in the transportation of motor vehicle components which are free of customs duties, presented with the goods therein;Seat post clamps and cable hangers for use in the manufacture of unicycles, bicycles or tricycles;Semi-elliptical heads, of an external diameter of either 609.6 mm or 762 mm, to specification ASTM A455, for use in air compressor tanks;Snap hooks of forged steel, zinc plated, 12.5 cm to 23 cm in length, for use in the manufacture of debris chutes and chute hoists;Steel stanchions for confining livestock either in pens or individually;The following to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells or potash or rock salt deposits:Flanged casing heads;Screwed casing heads for surface casings of an external diameter exceeding 273 mm, or rated for service in working pressures exceeding 14 MPa W.O.G. (water, oil, gas);Well packers and parts thereof;To be employed in the processing, storing or insemination of animal semen;Tracks for use in the manufacture of skid steer loaders;Vacuum evaporator masks, of stainless steel, having a 90% front etch and 10% back etch, for the production of photo cells;Wick sustainers for use in the manufacture of candles - Vacuum evaporator masks, of stainless steel, having a 90% front etch and a 10% back etch, for the production of photo cells-  
8419.20.00 Machinery, plant or laboratory equipment, whether or not electrically heated (excluding furnaces, ovens and other equipment of heading 85.14), for the treatment of materials by a process involving a change of temperature such as heating, cooking, roasting, distilling, rectifying, sterilizing, pasteurizing, steaming, drying, evaporating, vaporizing, condensing or cooling, other than machinery or plant of a kind used for domestic purposes; instantaneous or storage water heaters, non-electric. - Medical, surgical or laboratory sterilizersNMBFreeCCCT, LDCT
 86/134          




Top Use:    Harmonized Tariff Schedule of the Canada inquiry:  aircraft+parts

Recent user inquiry:



I want to Post a new feedback