| 7326.90.10 | 70 | Other articles of iron or steel. - Other - Couplings for sucker rods, pony rods or polished rods for oilfield related pumps;Fishing tools and parts thereof to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells or for drilling machinery employed in the exploration, discovery, development or operation of potash or rock salt deposits;For climbing or mountaineering;For keeping nets open and swivels, to be employed in commercial fishing or in the commercial harvesting of marine plants;For use in the manufacture of detectors for propane or other toxic fumes;For use in the manufacture of fire fighting vehicles;For use in the manufacture of goods of Section XVI or of Chapter 73, such goods being used in the recovery or production of crude oil from shales, oil-sands or tar-sands;For use in the manufacture or repair of engines or parts thereof for commercial fishing vessels;Forged steel clevis hooks and eye hooks for use in the manufacture of debris chutes;Identification bands for migratory birds;Pitless well heads and parts thereof;Reusable containers, specially designed to be employed in the transportation of motor vehicle components which are free of customs duties, presented with the goods therein;Seat post clamps and cable hangers for use in the manufacture of unicycles, bicycles or tricycles;Semi-elliptical heads, of an external diameter of either 609.6 mm or 762 mm, to specification ASTM A455, for use in air compressor tanks;Snap hooks of forged steel, zinc plated, 12.5 cm to 23 cm in length, for use in the manufacture of debris chutes and chute hoists;Steel stanchions for confining livestock either in pens or individually;The following to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells or potash or rock salt deposits:Flanged casing heads;Screwed casing heads for surface casings of an external diameter exceeding 273 mm, or rated for service in working pressures exceeding 14 MPa W.O.G. (water, oil, gas);Well packers and parts thereof;To be employed in the processing, storing or insemination of animal semen;Tracks for use in the manufacture of skid steer loaders;Vacuum evaporator masks, of stainless steel, having a 90% front etch and 10% back etch, for the production of photo cells;Wick sustainers for use in the manufacture of candles
- Semi-elliptical heads, of an external diameter of either 609.6 mm or
762 mm, to specification ASTM A455, for use in air compressor tanks | - | | |
| 7326.90.10 | 80 | Other articles of iron or steel. - Other - Couplings for sucker rods, pony rods or polished rods for oilfield related pumps;Fishing tools and parts thereof to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells or for drilling machinery employed in the exploration, discovery, development or operation of potash or rock salt deposits;For climbing or mountaineering;For keeping nets open and swivels, to be employed in commercial fishing or in the commercial harvesting of marine plants;For use in the manufacture of detectors for propane or other toxic fumes;For use in the manufacture of fire fighting vehicles;For use in the manufacture of goods of Section XVI or of Chapter 73, such goods being used in the recovery or production of crude oil from shales, oil-sands or tar-sands;For use in the manufacture or repair of engines or parts thereof for commercial fishing vessels;Forged steel clevis hooks and eye hooks for use in the manufacture of debris chutes;Identification bands for migratory birds;Pitless well heads and parts thereof;Reusable containers, specially designed to be employed in the transportation of motor vehicle components which are free of customs duties, presented with the goods therein;Seat post clamps and cable hangers for use in the manufacture of unicycles, bicycles or tricycles;Semi-elliptical heads, of an external diameter of either 609.6 mm or 762 mm, to specification ASTM A455, for use in air compressor tanks;Snap hooks of forged steel, zinc plated, 12.5 cm to 23 cm in length, for use in the manufacture of debris chutes and chute hoists;Steel stanchions for confining livestock either in pens or individually;The following to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells or potash or rock salt deposits:Flanged casing heads;Screwed casing heads for surface casings of an external diameter exceeding 273 mm, or rated for service in working pressures exceeding 14 MPa W.O.G. (water, oil, gas);Well packers and parts thereof;To be employed in the processing, storing or insemination of animal semen;Tracks for use in the manufacture of skid steer loaders;Vacuum evaporator masks, of stainless steel, having a 90% front etch and 10% back etch, for the production of photo cells;Wick sustainers for use in the manufacture of candles
- Tracks, for use in the manufacture of skid steer loaders | - | | |
| 7407.29.90 | 40 | Copper bars, rods and profiles. - Of copper alloys: - Other - Other - Bars, rods or solid profiles, worked | KGM | | |
| 7326.90.10 | 90 | Other articles of iron or steel. - Other - Couplings for sucker rods, pony rods or polished rods for oilfield related pumps;Fishing tools and parts thereof to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells or for drilling machinery employed in the exploration, discovery, development or operation of potash or rock salt deposits;For climbing or mountaineering;For keeping nets open and swivels, to be employed in commercial fishing or in the commercial harvesting of marine plants;For use in the manufacture of detectors for propane or other toxic fumes;For use in the manufacture of fire fighting vehicles;For use in the manufacture of goods of Section XVI or of Chapter 73, such goods being used in the recovery or production of crude oil from shales, oil-sands or tar-sands;For use in the manufacture or repair of engines or parts thereof for commercial fishing vessels;Forged steel clevis hooks and eye hooks for use in the manufacture of debris chutes;Identification bands for migratory birds;Pitless well heads and parts thereof;Reusable containers, specially designed to be employed in the transportation of motor vehicle components which are free of customs duties, presented with the goods therein;Seat post clamps and cable hangers for use in the manufacture of unicycles, bicycles or tricycles;Semi-elliptical heads, of an external diameter of either 609.6 mm or 762 mm, to specification ASTM A455, for use in air compressor tanks;Snap hooks of forged steel, zinc plated, 12.5 cm to 23 cm in length, for use in the manufacture of debris chutes and chute hoists;Steel stanchions for confining livestock either in pens or individually;The following to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells or potash or rock salt deposits:Flanged casing heads;Screwed casing heads for surface casings of an external diameter exceeding 273 mm, or rated for service in working pressures exceeding 14 MPa W.O.G. (water, oil, gas);Well packers and parts thereof;To be employed in the processing, storing or insemination of animal semen;Tracks for use in the manufacture of skid steer loaders;Vacuum evaporator masks, of stainless steel, having a 90% front etch and 10% back etch, for the production of photo cells;Wick sustainers for use in the manufacture of candles
- Other | - | | |
| 7407.29.90 | 20 | Copper bars, rods and profiles. - Of copper alloys: - Other - Other - Bars and rods, of a maximum cross-sectional dimension exceeding 12.7 mm, unworked: - Bars and rods, of a maximum cross-sectional dimension exceeding 12.7 mm, unworked | KGM | | |
| 7409.39.00 | 30 | Copper plates, sheets and strip, of a thickness exceeding 0.15 mm. - Of copper-tin base alloys (bronze): - Other - Worked | KGM | | |
| 7410.11.00 | 40 | Copper foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials), of a thickness (excluding any backing) not exceeding 0.15 mm. - Not backed: - Of refined copper - Of a thickness exceeding 0.025 mm but not exceeding 0.15 mm, unworked, of a width not exceeding 508 mm | KGM | | |
| 7410.12.00 | 40 | Copper foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials), of a thickness (excluding any backing) not exceeding 0.15 mm. - Not backed: - Of copper alloys - Of a thickness exceeding 0.025 mm but not exceeding 0.15 mm, unworked, of a width not exceeding 508 mm | KGM | | |
| 7411.10.00 | 10 | Copper tubes and pipes. - Of refined copper - For plumbing, unworked: - For plumbing, unworked | KGM | | |
| 7411.10.00 | 20 | Copper tubes and pipes. - Of refined copper - For refrigeration or air conditioning (ACR), unworked | KGM | | |
| 7411.10.00 | 31 | Copper tubes and pipes. - Of refined copper - Other, unworked: - Industrial or commercial | KGM | | |
| 7410.21.00 | 30 | Copper foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials), of a thickness (excluding any backing) not exceeding 0.15 mm. - Backed: - Of refined copper - Copper clad laminates, worked | KGM | | |
| 7411.10.00 | 39 | Copper tubes and pipes. - Of refined copper - Other, unworked: - Other | KGM | | |
| 7411.10.00 | 40 | Copper tubes and pipes. - Of refined copper - Worked | KGM | | |
| 7411.29.00 | 11 | Copper tubes and pipes. - Of copper alloys: - Other - Unworked: - Industrial or commercial | KGM | | |
| 7411.29.00 | 19 | Copper tubes and pipes. - Of copper alloys: - Other - Unworked: - Other | KGM | | |
| 7411.29.00 | 20 | Copper tubes and pipes. - Of copper alloys: - Other - Worked: - Worked | KGM | | |
| 7419.91.99 | | Other articles of copper. - Other: - Cast, moulded, stamped or forged, but not further worked - Other: - Other | KGM | 3% | CCCT, LDCT |
| 7419.91 | | Other articles of copper. - Other: - Cast, moulded, stamped or forged, but not further worked | | | |
| 7419.91.10 | 00 | Other articles of copper. - Other: - Cast, moulded, stamped or forged, but not further worked - Anodes for electroplating | KGM | Free | CCCT, LDCT |
| 7419.91.91 | 00 | Other articles of copper. - Other: - Cast, moulded, stamped or forged, but not further worked - Other: - For use in Canadian manufactures | KGM | Free | CCCT, LDCT |
| 7419.91.99 | 10 | Other articles of copper. - Other: - Cast, moulded, stamped or forged, but not further worked - Other: - Other - Castings, alloyed | KGM | | |
| 7419.91.99 | 90 | Other articles of copper. - Other: - Cast, moulded, stamped or forged, but not further worked - Other: - Other - Other | KGM | | |
| 7506.10.10 | 00 | Nickel plates, sheets, strip and foil. - Of nickel, not alloyed - Worked foil of a thickness not exceeding 0.15 mm | KGM | Free | CCCT, LDCT |
| 7506.10.90 | 10 | Nickel plates, sheets, strip and foil. - Of nickel, not alloyed - Other - Unworked | KGM | | |
Harmonized Tariff Schedule of the Canada inquiry: aircraft+parts
