| 7326.90.10 | 60 | Other articles of iron or steel. - Other - Couplings for sucker rods, pony rods or polished rods for oilfield related pumps;Fishing tools and parts thereof to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells or for drilling machinery employed in the exploration, discovery, development or operation of potash or rock salt deposits;For climbing or mountaineering;For keeping nets open and swivels, to be employed in commercial fishing or in the commercial harvesting of marine plants;For use in the manufacture of detectors for propane or other toxic fumes;For use in the manufacture of fire fighting vehicles;For use in the manufacture of goods of Section XVI or of Chapter 73, such goods being used in the recovery or production of crude oil from shales, oil-sands or tar-sands;For use in the manufacture or repair of engines or parts thereof for commercial fishing vessels;Forged steel clevis hooks and eye hooks for use in the manufacture of debris chutes;Identification bands for migratory birds;Pitless well heads and parts thereof;Reusable containers, specially designed to be employed in the transportation of motor vehicle components which are free of customs duties, presented with the goods therein;Seat post clamps and cable hangers for use in the manufacture of unicycles, bicycles or tricycles;Semi-elliptical heads, of an external diameter of either 609.6 mm or 762 mm, to specification ASTM A455, for use in air compressor tanks;Snap hooks of forged steel, zinc plated, 12.5 cm to 23 cm in length, for use in the manufacture of debris chutes and chute hoists;Steel stanchions for confining livestock either in pens or individually;The following to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells or potash or rock salt deposits:Flanged casing heads;Screwed casing heads for surface casings of an external diameter exceeding 273 mm, or rated for service in working pressures exceeding 14 MPa W.O.G. (water, oil, gas);Well packers and parts thereof;To be employed in the processing, storing or insemination of animal semen;Tracks for use in the manufacture of skid steer loaders;Vacuum evaporator masks, of stainless steel, having a 90% front etch and 10% back etch, for the production of photo cells;Wick sustainers for use in the manufacture of candles
- Vacuum evaporator masks, of stainless steel, having a 90% front etch and a 10% back etch, for the production of photo cells | - | | |
| 7326.90.10 | 70 | Other articles of iron or steel. - Other - Couplings for sucker rods, pony rods or polished rods for oilfield related pumps;Fishing tools and parts thereof to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells or for drilling machinery employed in the exploration, discovery, development or operation of potash or rock salt deposits;For climbing or mountaineering;For keeping nets open and swivels, to be employed in commercial fishing or in the commercial harvesting of marine plants;For use in the manufacture of detectors for propane or other toxic fumes;For use in the manufacture of fire fighting vehicles;For use in the manufacture of goods of Section XVI or of Chapter 73, such goods being used in the recovery or production of crude oil from shales, oil-sands or tar-sands;For use in the manufacture or repair of engines or parts thereof for commercial fishing vessels;Forged steel clevis hooks and eye hooks for use in the manufacture of debris chutes;Identification bands for migratory birds;Pitless well heads and parts thereof;Reusable containers, specially designed to be employed in the transportation of motor vehicle components which are free of customs duties, presented with the goods therein;Seat post clamps and cable hangers for use in the manufacture of unicycles, bicycles or tricycles;Semi-elliptical heads, of an external diameter of either 609.6 mm or 762 mm, to specification ASTM A455, for use in air compressor tanks;Snap hooks of forged steel, zinc plated, 12.5 cm to 23 cm in length, for use in the manufacture of debris chutes and chute hoists;Steel stanchions for confining livestock either in pens or individually;The following to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells or potash or rock salt deposits:Flanged casing heads;Screwed casing heads for surface casings of an external diameter exceeding 273 mm, or rated for service in working pressures exceeding 14 MPa W.O.G. (water, oil, gas);Well packers and parts thereof;To be employed in the processing, storing or insemination of animal semen;Tracks for use in the manufacture of skid steer loaders;Vacuum evaporator masks, of stainless steel, having a 90% front etch and 10% back etch, for the production of photo cells;Wick sustainers for use in the manufacture of candles
- Semi-elliptical heads, of an external diameter of either 609.6 mm or
762 mm, to specification ASTM A455, for use in air compressor tanks | - | | |
| 7326.90.10 | 80 | Other articles of iron or steel. - Other - Couplings for sucker rods, pony rods or polished rods for oilfield related pumps;Fishing tools and parts thereof to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells or for drilling machinery employed in the exploration, discovery, development or operation of potash or rock salt deposits;For climbing or mountaineering;For keeping nets open and swivels, to be employed in commercial fishing or in the commercial harvesting of marine plants;For use in the manufacture of detectors for propane or other toxic fumes;For use in the manufacture of fire fighting vehicles;For use in the manufacture of goods of Section XVI or of Chapter 73, such goods being used in the recovery or production of crude oil from shales, oil-sands or tar-sands;For use in the manufacture or repair of engines or parts thereof for commercial fishing vessels;Forged steel clevis hooks and eye hooks for use in the manufacture of debris chutes;Identification bands for migratory birds;Pitless well heads and parts thereof;Reusable containers, specially designed to be employed in the transportation of motor vehicle components which are free of customs duties, presented with the goods therein;Seat post clamps and cable hangers for use in the manufacture of unicycles, bicycles or tricycles;Semi-elliptical heads, of an external diameter of either 609.6 mm or 762 mm, to specification ASTM A455, for use in air compressor tanks;Snap hooks of forged steel, zinc plated, 12.5 cm to 23 cm in length, for use in the manufacture of debris chutes and chute hoists;Steel stanchions for confining livestock either in pens or individually;The following to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells or potash or rock salt deposits:Flanged casing heads;Screwed casing heads for surface casings of an external diameter exceeding 273 mm, or rated for service in working pressures exceeding 14 MPa W.O.G. (water, oil, gas);Well packers and parts thereof;To be employed in the processing, storing or insemination of animal semen;Tracks for use in the manufacture of skid steer loaders;Vacuum evaporator masks, of stainless steel, having a 90% front etch and 10% back etch, for the production of photo cells;Wick sustainers for use in the manufacture of candles
- Tracks, for use in the manufacture of skid steer loaders | - | | |
| 7326.90.10 | 90 | Other articles of iron or steel. - Other - Couplings for sucker rods, pony rods or polished rods for oilfield related pumps;Fishing tools and parts thereof to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells or for drilling machinery employed in the exploration, discovery, development or operation of potash or rock salt deposits;For climbing or mountaineering;For keeping nets open and swivels, to be employed in commercial fishing or in the commercial harvesting of marine plants;For use in the manufacture of detectors for propane or other toxic fumes;For use in the manufacture of fire fighting vehicles;For use in the manufacture of goods of Section XVI or of Chapter 73, such goods being used in the recovery or production of crude oil from shales, oil-sands or tar-sands;For use in the manufacture or repair of engines or parts thereof for commercial fishing vessels;Forged steel clevis hooks and eye hooks for use in the manufacture of debris chutes;Identification bands for migratory birds;Pitless well heads and parts thereof;Reusable containers, specially designed to be employed in the transportation of motor vehicle components which are free of customs duties, presented with the goods therein;Seat post clamps and cable hangers for use in the manufacture of unicycles, bicycles or tricycles;Semi-elliptical heads, of an external diameter of either 609.6 mm or 762 mm, to specification ASTM A455, for use in air compressor tanks;Snap hooks of forged steel, zinc plated, 12.5 cm to 23 cm in length, for use in the manufacture of debris chutes and chute hoists;Steel stanchions for confining livestock either in pens or individually;The following to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells or potash or rock salt deposits:Flanged casing heads;Screwed casing heads for surface casings of an external diameter exceeding 273 mm, or rated for service in working pressures exceeding 14 MPa W.O.G. (water, oil, gas);Well packers and parts thereof;To be employed in the processing, storing or insemination of animal semen;Tracks for use in the manufacture of skid steer loaders;Vacuum evaporator masks, of stainless steel, having a 90% front etch and 10% back etch, for the production of photo cells;Wick sustainers for use in the manufacture of candles
- Other | - | | |
| 8407.90.00 | 20 | Spark-ignition reciprocating or rotary internal combustion piston engines. - Other engines - Of a power not exceeding 56 kW, to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of water, oil or natural gas wells, in mining or quarrying, or in the distillation or recovery of products from natural gas | NMB | Free | CCCT, LDCT |
| 8408.90.00 | 10 | Compression-ignition internal combustion piston engines (diesel or semi-diesel engines). - Other engines - Semi-diesel engines; diesel dual fuel engines; diesel engines of a power not exceeding 74.6 kW per cylinder or of a power exceeding 207.3 kW per cylinder, regardless of cylinder displacement; diesel engines with a displacement of less than 8,193.5 cm³ per cylinder; all of the foregoing to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of water, oil or natural gas wells, in mining or quarrying, or in the distillation or recovery of products from natural gas: - Semi-diesel engines; Diesel dual fuel engines; Diesel engines, of a power not exceeding 74.6 kW per cylinder or of a power exceeding 207.3 kW per cylinder, regardless of cylinder displacement; Diesel engines, with a displacement of less than 8,193.5 cm³ per cylinder; All of the foregoing, to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of water, oil or natural gas wells, in mining or quarrying, or in the distillation or recovery of products from natural gas | NMB | Free | CCCT, LDCT |
| 8411.82.10 | 00 | Turbo-jets, turbo-propellers and other gas turbines. - Other gas turbines: - Of a power exceeding 5,000 kW - Of a power exceeding 44,742 kW, to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of water, oil or natural gas wells, in mining or quarrying, or in the distillation or recovery of products from natural gas;
Of a power of 12,682 kW or more but not exceeding 14,547 kW, for use in the manufacture of compressor sets | NMB | Free | CCCT, LDCT |
| 8412.29.00 | 10 | Other engines and motors. - Hydraulic power engines and motors: - Other - To be employed in the exploration, discovery, development, maintenance, testing, depletion or production of water, oil or natural gas wells, in mining or quarrying, or in the distillation or recovery of products from natural gas | NMB | Free | CCCT, LDCT |
| 8412.90.00 | 20 | Other engines and motors. - Parts - Of the goods of classification No. 8412.29.00.10 or 8412.39.00.10: - Of the other engines and motors, to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of water, oil or natural gas wells, in mining or quarrying, or in the distillation or recovery of products from natural gas | - | Free | CCCT, LDCT |
| 8413.70.10 | 21 | Pumps for liquids, whether or not fitted with a measuring device; liquid elevators. - Other centrifugal pumps - Battery operated, for recreational vehicles and boats;
Canned rotor;
De-foaming type;
Drinking fountain;
For food, pharmaceutical or similar applications;
For swimming pools;
Heat transfer, oil type;
Magnetic drive chemical;
Milk;
Molten metal;
Multi-stage single suction, with head over 5,516 kPa;
Of a power not exceeding 250 kW, for pulp manufacturing;
Portable, engine type, capable of producing a minimum pressure boost of 1,034 kPa, maintaining a flow rate exceeding 700 l/m at that pressure;
Solar powered;
Submersible slurry, agitator type;
Transformer oil circulation pumps;
Vertical slurry, of cantilever shaft design, having a pump discharge flange size of a diameter of 50.8 cm or more, for track-laying machines to be employed in mining, recovering and producing crude oil from shales, oil-sands or tar-sands;
With speed variators, for the wine and juice making industries - Multi-stage single suction pumps with head over 5,516 kPa: - To be employed in the exploration, discovery, development, maintenance, testing, depletion or production of water, oil or natural gas wells, in mining or quarrying, or in the distillation or recovery of products from natural gas | NMB | Free | CCCT, LDCT |
| 8419.50.00 | 10 | Machinery, plant or laboratory equipment, whether or not electrically heated (excluding furnaces, ovens and other equipment of heading 85.14), for the treatment of materials by a process involving a change of temperature such as heating, cooking, roasting, distilling, rectifying, sterilizing, pasteurizing, steaming, drying, evaporating, vaporizing, condensing or cooling, other than machinery or plant of a kind used for domestic purposes; instantaneous or storage water heaters, non-electric.
- Heat exchange units - Braised aluminum heat exchangers for cryogenic services, to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of water, oil or natural gas wells, in mining or quarrying, or in the distillation or recovery of products from natural gas | NMB | Free | CCCT, LDCT |
| 8421.29.00 | 10 | Centrifuges, including centrifugal dryers; filtering or purifying machinery and apparatus, for liquids or gases. - Filtering or purifying machinery and apparatus for liquids: - Other - Filter presses, to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells | NMB | Free | CCCT, LDCT |
| 8430.41.00 | 50 | Other moving, grading, levelling, scraping, excavating, tamping, compacting, extracting or boring machinery, for earth, minerals or ores; pile-drivers and pile-extractors; snow-ploughs and snow-blowers. - Other boring or sinking machinery: - Self-propelled - Drilling or work-over rigs, to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells or potash or rock salt deposits | NMB | Free | CCCT, LDCT |
| 8430.49.00 | 51 | Other moving, grading, levelling, scraping, excavating, tamping, compacting, extracting or boring machinery, for earth, minerals or ores; pile-drivers and pile-extractors; snow-ploughs and snow-blowers. - Other boring or sinking machinery: - Other - Drilling or work-over rigs, to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells or potash or rock salt deposits: - Rotary, oil and gas field drilling | NMB | Free | CCCT, LDCT |
| 8430.49.00 | 52 | Other moving, grading, levelling, scraping, excavating, tamping, compacting, extracting or boring machinery, for earth, minerals or ores; pile-drivers and pile-extractors; snow-ploughs and snow-blowers. - Other boring or sinking machinery: - Other - Drilling or work-over rigs, to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells or potash or rock salt deposits: - Other, oil and gas field drilling | NMB | Free | CCCT, LDCT |
| 8430.49.00 | 59 | Other moving, grading, levelling, scraping, excavating, tamping, compacting, extracting or boring machinery, for earth, minerals or ores; pile-drivers and pile-extractors; snow-ploughs and snow-blowers. - Other boring or sinking machinery: - Other - Drilling or work-over rigs, to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells or potash or rock salt deposits: - Other | NMB | Free | CCCT, LDCT |
| 8479.89.10 | 00 | Machines and mechanical appliances having individual functions, not specified or included elsewhere in this Chapter. - Other machines and mechanical appliances: - Other - Aircraft ground use continuous flow jet engine start units; Artificial fog or smoke generators; Automatic loaders for small arms ammunition; Automotive relay assembly lines; Box dumpers for use with fresh fruit or fresh vegetables; Cathode assembly systems; Coating plant with thermal waste gas purification plant; Coin control devices, of iron or steel, for apparatus, other than telephones, which vends merchandise, services or tickets; Condenser tube cleaning systems; Double-sided printed circuit board coating systems; Dry solder mask processing lines for printed circuit board production; Fishing tools or well fracturing machines and appliances to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells or for use in drilling machinery to be employed in the exploration, discovery, development or operation of potash or rock salt deposits; Horizontal solder levelling systems for printed circuit board production; Initial fluid filling machines for automobiles; Laboratory jet dyeing machines; Liquid solder mask coater processing lines for printed circuit board production; Low volume needle or taper nozzle fluid dispensers; Machinery to be employed in the manufacture of pharmaceutical goods; Machines to be employed in the manufacture of slide fasteners, tooth brushes or Venetian blinds; Machines for use by printers, lithographers, bookbinders, paper or foil converters, manufacturers of stereotypes, electrotypes or printing plates or rolls, or by manufacturers of articles made from paper, paperboard or foil; Multilayer registration systems for printed circuit board production; On-line capsule inspection systems; Pipe scraping systems for cleaning; Powder presses for X-ray diffraction samples; Printed circuit board conveyorized washing and drying machines; Railcar door openers or pullers; Rider type scrubbers or polishers; Scallop attachment machines; Shot shell cartridge loaders; Tape embossing machines; Textile or plastic separator systems for footwear manufacture; Tin strip etch lines for printed circuit board production; Trailer mounted jet air start units; Ultrasonic cleaners excluding those for washing cases | NMB | Free | CCCT, LDCT |
| 8479.89.90 | 20 | Machines and mechanical appliances having individual functions, not specified or included elsewhere in this Chapter. - Other machines and mechanical appliances: - Other - Other: - Other - For motor vehicle maintenance | NMB | Free | CCCT, LDCT |
| 8507.80.10 | 00 | Electric accumulators, including separators therefor, whether or not rectangular (including square). - Other accumulators - Alkaline or lithium cells having welded connectors or designed to receive welded connectors, for use in electronic lock systems or in components thereof;Low discharge types, for use in the manufacture, maintenance or repair of buoys or beacons for the Government of Canada | NMB | Free | CCCT, LDCT |
| 8530.80.10 | 00 | Electrical signalling, safety or traffic control equipment for railways, tramways, roads, inland waterways, parking facilities, port installations or airfields (other than those of heading 86.08).
- Other equipment - For use in the manufacture, maintenance or repair of buoys for the Government of Canada | - | Free | CCCT, LDCT |
| 8604.00 | | Railway or tramway maintenance or service vehicles, whether or not self-propelled (for example, workshops, cranes, ballast tampers, trackliners, testing coaches and track inspection vehicles). | | | |
| 8604.00.10 | 00 | Railway or tramway maintenance or service vehicles, whether or not self-propelled (for example, workshops, cranes, ballast tampers, trackliners, testing coaches and track inspection vehicles). - Ballast spreaders;Buggies for transporting work crews and track material trailers, not exceeding 20 tonnes;Combination ballast broom and snow switch cleaners;Manual feed spike drivers for maintenance or production applications;On-track brush cutters;Rail tie spacing machines;Snow plows;Supply push carts;Tie cranes;Track carriage cranes | NMB | 6% | CCCT, LDCT |
| 8604.00.90 | 00 | Railway or tramway maintenance or service vehicles, whether or not self-propelled (for example, workshops, cranes, ballast tampers, trackliners, testing coaches and track inspection vehicles). - Other | NMB | Free | CCCT, LDCT |
| 8607.99.11 | 30 | Parts of railway or tramway locomotives or rolling-stock. - Other: - Other - Of self-propelled rolling-stock: - For use in the repair of tramway vehicles (excluding subway cars) with magnetic track brakes;
Of the vehicles of heading 86.04;
Of railway vehicles for the transport of passengers, baggage, mail or express traffic - Of railway or tramway maintenance or service vehicles | - | | |
| 8705.10.10 | | Special purpose motor vehicles, other than those principally designed for the transport of persons or goods (for example, breakdown lorries (wreckers), crane lorries (mobile cranes), fire fighting vehicles, concrete mixer lorries (concrete-mixers), road sweeper lorries (road sweepers), spraying lorries (spraying vehicles), mobile workshops, mobile radiological units). - Crane lorries (mobile cranes) - Railway maintenance cranes equipped to travel both by road and rail, with a lifting capacity exceeding 36.3 tonnes but not exceeding 68 tonnes
Note: The benefit of the General Preferential Tariff is withdrawn from goods of this tariff item that originate in the Republic of Korea. | NMB | 6.1% | CCCT, LDCT |
Harmonized Tariff Schedule of the Canada inquiry: aircraft+parts
