| 8419.19.00 | 10 | Machinery, plant or laboratory equipment, whether or not electrically heated (excluding furnaces, ovens and other equipment of heading 85.14), for the treatment of materials by a process involving a change of temperature such as heating, cooking, roasting, distilling, rectifying, sterilizing, pasteurizing, steaming, drying, evaporating, vaporizing, condensing or cooling, other than machinery or plant of a kind used for domestic purposes; instantaneous or storage water heaters, non-electric.
- Instantaneous or storage water heaters, non-electric: - Other - For domestic purposes | NMB | 5% | CCCT, LDCT |
| 8419.19.00 | 90 | Machinery, plant or laboratory equipment, whether or not electrically heated (excluding furnaces, ovens and other equipment of heading 85.14), for the treatment of materials by a process involving a change of temperature such as heating, cooking, roasting, distilling, rectifying, sterilizing, pasteurizing, steaming, drying, evaporating, vaporizing, condensing or cooling, other than machinery or plant of a kind used for domestic purposes; instantaneous or storage water heaters, non-electric.
- Instantaneous or storage water heaters, non-electric: - Other - Other | NMB | 5% | CCCT, LDCT |
| 7315.11.00 | 10 | Chain and parts thereof, of iron or steel. - Articulated link chain and parts thereof: - Roller chain - Power transmission, conveyor or offset sidebar type roller chain, to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells or potash or rock salt deposits | KGM | | |
| 7325.99.10 | 00 | Other cast articles of iron or steel. - Other: - Other - The following, to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells or potash or rock salt deposits:
Flanged casing heads;
Screwed casing heads for surface casings of an external diameter exceeding 273 mm, or rated for service in working pressures exceeding 14 MPa W.O.G. (water, oil, gas) | KGM | Free | CCCT, LDCT |
| 7326.19.10 | 00 | Other articles of iron or steel. - Forged or stamped, but not further worked: - Other - Flanged wellhead tubing heads and flanged casing head spools, in the rough, for use in the manufacture of wellhead tubing heads or casing head spools, rated for service in working pressures exceeding 14 MPa W.O.G. (water, oil, gas), to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells;
Wick sustainers for use in the manufacture of candles | KGM | Free | CCCT, LDCT |
| 8418.91.10 | 00 | Refrigerators, freezers and other refrigerating or freezing equipment, electric or other; heat pumps other than air conditioning machines of heading 84.15.
- Parts: - Furniture designed to receive refrigerating or freezing equipment - For use in the manufacture of the goods of this heading;
For the goods of tariff item No. 8418.10.10, 8418.10.90, 8418.21.00, 8418.29.00, 8418.30.10, 8418.30.90, 8418.40.10, 8418.40.90, 8418.50.10, 8418.50.29, 8418.61.00, 8418.69.20 or 8418.69.90 | - | Free | CCCT, LDCT |
| 7408.11.20 | 20 | Copper wire. - Of refined copper: - Of which the maximum cross-sectional dimension exceeds 6 mm
- Exceeding 9.5 mm but not exceeding 12.7 mm - Coated or covered | KGM | | |
| 7326.90.10 | | Other articles of iron or steel. - Other - Couplings for sucker rods, pony rods or polished rods for oilfield related pumps;Fishing tools and parts thereof to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells or for drilling machinery employed in the exploration, discovery, development or operation of potash or rock salt deposits;For climbing or mountaineering;For keeping nets open and swivels, to be employed in commercial fishing or in the commercial harvesting of marine plants;For use in the manufacture of detectors for propane or other toxic fumes;For use in the manufacture of fire fighting vehicles;For use in the manufacture of goods of Section XVI or of Chapter 73, such goods being used in the recovery or production of crude oil from shales, oil-sands or tar-sands;For use in the manufacture or repair of engines or parts thereof for commercial fishing vessels;Forged steel clevis hooks and eye hooks for use in the manufacture of debris chutes;Identification bands for migratory birds;Pitless well heads and parts thereof;Reusable containers, specially designed to be employed in the transportation of motor vehicle components which are free of customs duties, presented with the goods therein;Seat post clamps and cable hangers for use in the manufacture of unicycles, bicycles or tricycles;Semi-elliptical heads, of an external diameter of either 609.6 mm or 762 mm, to specification ASTM A455, for use in air compressor tanks;Snap hooks of forged steel, zinc plated, 12.5 cm to 23 cm in length, for use in the manufacture of debris chutes and chute hoists;Steel stanchions for confining livestock either in pens or individually;The following to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells or potash or rock salt deposits:Flanged casing heads;Screwed casing heads for surface casings of an external diameter exceeding 273 mm, or rated for service in working pressures exceeding 14 MPa W.O.G. (water, oil, gas);Well packers and parts thereof;To be employed in the processing, storing or insemination of animal semen;Tracks for use in the manufacture of skid steer loaders;Vacuum evaporator masks, of stainless steel, having a 90% front etch and 10% back etch, for the production of photo cells;Wick sustainers for use in the manufacture of candles | - | Free | CCCT, LDCT |
| 7407.10.21 | | Copper bars, rods and profiles. - Of refined copper - Other: - Bars and rods, of which the maximum cross-sectional dimension exceeds 12.7 mm;
Solid profiles | KGM | Free | CCCT, LDCT |
| 7407.10.21 | 10 | Copper bars, rods and profiles. - Of refined copper - Other: - Bars and rods, of which the maximum cross-sectional dimension exceeds 12.7 mm;
Solid profiles - Bars and rods, unworked | KGM | | |
| 7407.10.21 | 90 | Copper bars, rods and profiles. - Of refined copper - Other: - Bars and rods, of which the maximum cross-sectional dimension exceeds 12.7 mm;
Solid profiles - Other | KGM | | |
| 8418.91 | | Refrigerators, freezers and other refrigerating or freezing equipment, electric or other; heat pumps other than air conditioning machines of heading 84.15.
- Parts: - Furniture designed to receive refrigerating or freezing equipment | | | |
| 7326.90.10 | 10 | Other articles of iron or steel. - Other - Couplings for sucker rods, pony rods or polished rods for oilfield related pumps;Fishing tools and parts thereof to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells or for drilling machinery employed in the exploration, discovery, development or operation of potash or rock salt deposits;For climbing or mountaineering;For keeping nets open and swivels, to be employed in commercial fishing or in the commercial harvesting of marine plants;For use in the manufacture of detectors for propane or other toxic fumes;For use in the manufacture of fire fighting vehicles;For use in the manufacture of goods of Section XVI or of Chapter 73, such goods being used in the recovery or production of crude oil from shales, oil-sands or tar-sands;For use in the manufacture or repair of engines or parts thereof for commercial fishing vessels;Forged steel clevis hooks and eye hooks for use in the manufacture of debris chutes;Identification bands for migratory birds;Pitless well heads and parts thereof;Reusable containers, specially designed to be employed in the transportation of motor vehicle components which are free of customs duties, presented with the goods therein;Seat post clamps and cable hangers for use in the manufacture of unicycles, bicycles or tricycles;Semi-elliptical heads, of an external diameter of either 609.6 mm or 762 mm, to specification ASTM A455, for use in air compressor tanks;Snap hooks of forged steel, zinc plated, 12.5 cm to 23 cm in length, for use in the manufacture of debris chutes and chute hoists;Steel stanchions for confining livestock either in pens or individually;The following to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells or potash or rock salt deposits:Flanged casing heads;Screwed casing heads for surface casings of an external diameter exceeding 273 mm, or rated for service in working pressures exceeding 14 MPa W.O.G. (water, oil, gas);Well packers and parts thereof;To be employed in the processing, storing or insemination of animal semen;Tracks for use in the manufacture of skid steer loaders;Vacuum evaporator masks, of stainless steel, having a 90% front etch and 10% back etch, for the production of photo cells;Wick sustainers for use in the manufacture of candles
- Steel stanchions, for confining livestock either in pens or individually | - | | |
| 7407.21.90 | 10 | Copper bars, rods and profiles. - Of copper alloys: - Of copper-zinc base alloys (brass) - Other - Bars and rods, of a maximum cross-sectional dimension not exceeding 12.7 mm, unworked | KGM | | |
| 7326.90.10 | 20 | Other articles of iron or steel. - Other - Couplings for sucker rods, pony rods or polished rods for oilfield related pumps;Fishing tools and parts thereof to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells or for drilling machinery employed in the exploration, discovery, development or operation of potash or rock salt deposits;For climbing or mountaineering;For keeping nets open and swivels, to be employed in commercial fishing or in the commercial harvesting of marine plants;For use in the manufacture of detectors for propane or other toxic fumes;For use in the manufacture of fire fighting vehicles;For use in the manufacture of goods of Section XVI or of Chapter 73, such goods being used in the recovery or production of crude oil from shales, oil-sands or tar-sands;For use in the manufacture or repair of engines or parts thereof for commercial fishing vessels;Forged steel clevis hooks and eye hooks for use in the manufacture of debris chutes;Identification bands for migratory birds;Pitless well heads and parts thereof;Reusable containers, specially designed to be employed in the transportation of motor vehicle components which are free of customs duties, presented with the goods therein;Seat post clamps and cable hangers for use in the manufacture of unicycles, bicycles or tricycles;Semi-elliptical heads, of an external diameter of either 609.6 mm or 762 mm, to specification ASTM A455, for use in air compressor tanks;Snap hooks of forged steel, zinc plated, 12.5 cm to 23 cm in length, for use in the manufacture of debris chutes and chute hoists;Steel stanchions for confining livestock either in pens or individually;The following to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells or potash or rock salt deposits:Flanged casing heads;Screwed casing heads for surface casings of an external diameter exceeding 273 mm, or rated for service in working pressures exceeding 14 MPa W.O.G. (water, oil, gas);Well packers and parts thereof;To be employed in the processing, storing or insemination of animal semen;Tracks for use in the manufacture of skid steer loaders;Vacuum evaporator masks, of stainless steel, having a 90% front etch and 10% back etch, for the production of photo cells;Wick sustainers for use in the manufacture of candles
- Identification bands for migratory birds | - | | |
| 7326.90.10 | 30 | Other articles of iron or steel. - Other - Couplings for sucker rods, pony rods or polished rods for oilfield related pumps;Fishing tools and parts thereof to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells or for drilling machinery employed in the exploration, discovery, development or operation of potash or rock salt deposits;For climbing or mountaineering;For keeping nets open and swivels, to be employed in commercial fishing or in the commercial harvesting of marine plants;For use in the manufacture of detectors for propane or other toxic fumes;For use in the manufacture of fire fighting vehicles;For use in the manufacture of goods of Section XVI or of Chapter 73, such goods being used in the recovery or production of crude oil from shales, oil-sands or tar-sands;For use in the manufacture or repair of engines or parts thereof for commercial fishing vessels;Forged steel clevis hooks and eye hooks for use in the manufacture of debris chutes;Identification bands for migratory birds;Pitless well heads and parts thereof;Reusable containers, specially designed to be employed in the transportation of motor vehicle components which are free of customs duties, presented with the goods therein;Seat post clamps and cable hangers for use in the manufacture of unicycles, bicycles or tricycles;Semi-elliptical heads, of an external diameter of either 609.6 mm or 762 mm, to specification ASTM A455, for use in air compressor tanks;Snap hooks of forged steel, zinc plated, 12.5 cm to 23 cm in length, for use in the manufacture of debris chutes and chute hoists;Steel stanchions for confining livestock either in pens or individually;The following to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells or potash or rock salt deposits:Flanged casing heads;Screwed casing heads for surface casings of an external diameter exceeding 273 mm, or rated for service in working pressures exceeding 14 MPa W.O.G. (water, oil, gas);Well packers and parts thereof;To be employed in the processing, storing or insemination of animal semen;Tracks for use in the manufacture of skid steer loaders;Vacuum evaporator masks, of stainless steel, having a 90% front etch and 10% back etch, for the production of photo cells;Wick sustainers for use in the manufacture of candles
- The following, to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells or potash or rock salt deposits: Flanged casing heads; Screwed casing heads, for surface casings, of an external diameter exceeding 273 mm, or rated for service in working pressures exceeding 14 MPa W.O.G. (water, oil, gas); Well packers and parts thereof | - | | |
| 7326.90.10 | 40 | Other articles of iron or steel. - Other - Couplings for sucker rods, pony rods or polished rods for oilfield related pumps;Fishing tools and parts thereof to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells or for drilling machinery employed in the exploration, discovery, development or operation of potash or rock salt deposits;For climbing or mountaineering;For keeping nets open and swivels, to be employed in commercial fishing or in the commercial harvesting of marine plants;For use in the manufacture of detectors for propane or other toxic fumes;For use in the manufacture of fire fighting vehicles;For use in the manufacture of goods of Section XVI or of Chapter 73, such goods being used in the recovery or production of crude oil from shales, oil-sands or tar-sands;For use in the manufacture or repair of engines or parts thereof for commercial fishing vessels;Forged steel clevis hooks and eye hooks for use in the manufacture of debris chutes;Identification bands for migratory birds;Pitless well heads and parts thereof;Reusable containers, specially designed to be employed in the transportation of motor vehicle components which are free of customs duties, presented with the goods therein;Seat post clamps and cable hangers for use in the manufacture of unicycles, bicycles or tricycles;Semi-elliptical heads, of an external diameter of either 609.6 mm or 762 mm, to specification ASTM A455, for use in air compressor tanks;Snap hooks of forged steel, zinc plated, 12.5 cm to 23 cm in length, for use in the manufacture of debris chutes and chute hoists;Steel stanchions for confining livestock either in pens or individually;The following to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells or potash or rock salt deposits:Flanged casing heads;Screwed casing heads for surface casings of an external diameter exceeding 273 mm, or rated for service in working pressures exceeding 14 MPa W.O.G. (water, oil, gas);Well packers and parts thereof;To be employed in the processing, storing or insemination of animal semen;Tracks for use in the manufacture of skid steer loaders;Vacuum evaporator masks, of stainless steel, having a 90% front etch and 10% back etch, for the production of photo cells;Wick sustainers for use in the manufacture of candles
- Pitless well heads and parts thereof | - | | |
| 7407.21.90 | 20 | Copper bars, rods and profiles. - Of copper alloys: - Of copper-zinc base alloys (brass) - Other - Bars and rods of a maximum cross-sectional dimension exceeding
12.7 mm, unworked | KGM | | |
| 7407.29.21 | 00 | Copper bars, rods and profiles. - Of copper alloys: - Other - Of copper-nickel base alloys (curpro-nickel) or copper-nickel-zinc base alloys (nickel silver): - Bars and rods, of copper-nickel base alloys (cupro-nickel) of which the maximum cross-sectional dimension exceeds 12.7 mm;
Solid profiles;
Unworked hollow profiles | KGM | Free | CCCT, LDCT |
| 7408.11 | | Copper wire. - Of refined copper: - Of which the maximum cross-sectional dimension exceeds 6 mm | | | |
| 7408.11.11 | 00 | Copper wire. - Of refined copper: - Of which the maximum cross-sectional dimension exceeds 6 mm
- Not exceeding 9.5 mm: - Not coated or covered | KGM | Free | CCCT, LDCT |
| 7326.90.10 | 50 | Other articles of iron or steel. - Other - Couplings for sucker rods, pony rods or polished rods for oilfield related pumps;Fishing tools and parts thereof to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells or for drilling machinery employed in the exploration, discovery, development or operation of potash or rock salt deposits;For climbing or mountaineering;For keeping nets open and swivels, to be employed in commercial fishing or in the commercial harvesting of marine plants;For use in the manufacture of detectors for propane or other toxic fumes;For use in the manufacture of fire fighting vehicles;For use in the manufacture of goods of Section XVI or of Chapter 73, such goods being used in the recovery or production of crude oil from shales, oil-sands or tar-sands;For use in the manufacture or repair of engines or parts thereof for commercial fishing vessels;Forged steel clevis hooks and eye hooks for use in the manufacture of debris chutes;Identification bands for migratory birds;Pitless well heads and parts thereof;Reusable containers, specially designed to be employed in the transportation of motor vehicle components which are free of customs duties, presented with the goods therein;Seat post clamps and cable hangers for use in the manufacture of unicycles, bicycles or tricycles;Semi-elliptical heads, of an external diameter of either 609.6 mm or 762 mm, to specification ASTM A455, for use in air compressor tanks;Snap hooks of forged steel, zinc plated, 12.5 cm to 23 cm in length, for use in the manufacture of debris chutes and chute hoists;Steel stanchions for confining livestock either in pens or individually;The following to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells or potash or rock salt deposits:Flanged casing heads;Screwed casing heads for surface casings of an external diameter exceeding 273 mm, or rated for service in working pressures exceeding 14 MPa W.O.G. (water, oil, gas);Well packers and parts thereof;To be employed in the processing, storing or insemination of animal semen;Tracks for use in the manufacture of skid steer loaders;Vacuum evaporator masks, of stainless steel, having a 90% front etch and 10% back etch, for the production of photo cells;Wick sustainers for use in the manufacture of candles
- Couplings for sucker rods, pony rods or polished rods for oilfield related pumps | - | | |
| 8419.20.00 | 20 | Machinery, plant or laboratory equipment, whether or not electrically heated (excluding furnaces, ovens and other equipment of heading 85.14), for the treatment of materials by a process involving a change of temperature such as heating, cooking, roasting, distilling, rectifying, sterilizing, pasteurizing, steaming, drying, evaporating, vaporizing, condensing or cooling, other than machinery or plant of a kind used for domestic purposes; instantaneous or storage water heaters, non-electric.
- Medical, surgical or laboratory sterilizers - Laboratory sterilizers | NMB | Free | CCCT, LDCT |
| 8419.31.00 | 00 | Machinery, plant or laboratory equipment, whether or not electrically heated (excluding furnaces, ovens and other equipment of heading 85.14), for the treatment of materials by a process involving a change of temperature such as heating, cooking, roasting, distilling, rectifying, sterilizing, pasteurizing, steaming, drying, evaporating, vaporizing, condensing or cooling, other than machinery or plant of a kind used for domestic purposes; instantaneous or storage water heaters, non-electric.
- Dryers: - For agricultural products | NMB | Free | CCCT, LDCT |
| 7326.90.10 | 60 | Other articles of iron or steel. - Other - Couplings for sucker rods, pony rods or polished rods for oilfield related pumps;Fishing tools and parts thereof to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells or for drilling machinery employed in the exploration, discovery, development or operation of potash or rock salt deposits;For climbing or mountaineering;For keeping nets open and swivels, to be employed in commercial fishing or in the commercial harvesting of marine plants;For use in the manufacture of detectors for propane or other toxic fumes;For use in the manufacture of fire fighting vehicles;For use in the manufacture of goods of Section XVI or of Chapter 73, such goods being used in the recovery or production of crude oil from shales, oil-sands or tar-sands;For use in the manufacture or repair of engines or parts thereof for commercial fishing vessels;Forged steel clevis hooks and eye hooks for use in the manufacture of debris chutes;Identification bands for migratory birds;Pitless well heads and parts thereof;Reusable containers, specially designed to be employed in the transportation of motor vehicle components which are free of customs duties, presented with the goods therein;Seat post clamps and cable hangers for use in the manufacture of unicycles, bicycles or tricycles;Semi-elliptical heads, of an external diameter of either 609.6 mm or 762 mm, to specification ASTM A455, for use in air compressor tanks;Snap hooks of forged steel, zinc plated, 12.5 cm to 23 cm in length, for use in the manufacture of debris chutes and chute hoists;Steel stanchions for confining livestock either in pens or individually;The following to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells or potash or rock salt deposits:Flanged casing heads;Screwed casing heads for surface casings of an external diameter exceeding 273 mm, or rated for service in working pressures exceeding 14 MPa W.O.G. (water, oil, gas);Well packers and parts thereof;To be employed in the processing, storing or insemination of animal semen;Tracks for use in the manufacture of skid steer loaders;Vacuum evaporator masks, of stainless steel, having a 90% front etch and 10% back etch, for the production of photo cells;Wick sustainers for use in the manufacture of candles
- Vacuum evaporator masks, of stainless steel, having a 90% front etch and a 10% back etch, for the production of photo cells | - | | |
Harmonized Tariff Schedule of the Canada inquiry: aircraft+parts
