| 8542.39.00 | 22 | Electronic integrated circuits. - Electronic integrated circuits: - Other - Hybrid integrated circuits: - Unmounted chips, dice or wafers | NMB | Free | CCCT, LDCT |
| 8518.90.10 | 90 | Microphones and stands therefor; loudspeakers, whether or not mounted in their enclosures; headphones and earphones, whether or not combined with a microphone, and sets consisting of a microphone and one or more loudspeakers; audio-frequency electric amplifiers; electric sound amplifier sets. - Parts - Cone housings, field cases and pole pieces, for speakers with mounting dimensions exceeding 203 mm, cones and cone surrounds, dust covers and spiders, for use in the manufacture of loudspeakers;
Of compression horn drivers or compression horn tweeters for use in the manufacture of speaker systems;
Of loudspeakers, without housings, having a frequency range of 300 Hz to 3.4 KHz and with a diameter not exceeding 50 mm, for telecommunications use;
Of microphones, stands therefor, and headphones (including earphones) - Other | - | Free | CCCT, LDCT |
| 9003.19.00 | | Frames and mountings for spectacles, goggles or the like, and parts thereof. - Frames and mountings: - Of other materials | NMB | Free | CCCT, LDCT |
| 9616.10.00 | 00 | Scent sprays and similar toilet sprays, and mounts and heads therefor; powder-puffs and pads for the application of cosmetics or toilet preparations. | - | 8.5% | CCCT, LDCT |
| 98.25 | | Goods imported by mail or courier for personal or household use.
The following goods are not eligible for classification under this heading: goods or classes of goods that, on importation, may be released only in accordance with the accounting provisions of the Customs Act or the applicable regulations on condition that the importer or owner of the goods provides, before the release of the goods, any certificate, licence, permit or other document and any information that is required under any Act of Parliament or any regulation made under such an Act that prohibits, controls or regulates the importation of goods, but this exclusion from eligibility for classification does not apply to any goods imported under the authority of and in accordance with a general import permit issued under subsection 8(1.1) or section 8.3 of the Export and Import Permits Act.
The value of goods imported that are eligible to be classified under this heading shall not exceed $500.
The following goods are not eligible for classification under tariff item No. 9825.10.00, 9825.20.00 or 9825.30.00: alcoholic beverages; tobacco; tobacco products; goods subject to any additional customs duty under sections 21.1 to 22 of this Act; goods subject to any tax imposed under subsection 23(1) of the Excise Tax Act; goods in respect of which tax is not payable under Division III of Part IX of that Act; and goods in respect of which tax is payable under section 212.1 of that Act if an amount must be deducted from that tax under section 214.1 of that Act. | | | |
| 9825.10.00 | | Goods imported by mail or courier for personal or household use.
The following goods are not eligible for classification under this heading: goods or classes of goods that, on importation, may be released only in accordance with the accounting provisions of the Customs Act or the applicable regulations on condition that the importer or owner of the goods provides, before the release of the goods, any certificate, licence, permit or other document and any information that is required under any Act of Parliament or any regulation made under such an Act that prohibits, controls or regulates the importation of goods, but this exclusion from eligibility for classification does not apply to any goods imported under the authority of and in accordance with a general import permit issued under subsection 8(1.1) or section 8.3 of the Export and Import Permits Act.
The value of goods imported that are eligible to be classified under this heading shall not exceed $500.
The following goods are not eligible for classification under tariff item No. 9825.10.00, 9825.20.00 or 9825.30.00: alcoholic beverages; tobacco; tobacco products; goods subject to any additional customs duty under sections 21.1 to 22 of this Act; goods subject to any tax imposed under subsection 23(1) of the Excise Tax Act; goods in respect of which tax is not payable under Division III of Part IX of that Act; and goods in respect of which tax is payable under section 212.1 of that Act if an amount must be deducted from that tax under section 214.1 of that Act. - Goods which, if classified in accordance with the provisions of Chapters 1 to 97, would be subject to a rate of customs duty under the Most-Favoured-Nation Tariff that is not more than 5 percentage points greater or less than the rate provided by this tariff item under the Most-Favoured-Nation Tariff. | | 20% | UST, MT, M |
| 8426.91.00 | 00 | Ships' derricks; cranes, including cable cranes; mobile lifting frames, straddle carriers and works trucks fitted with a crane. - Other machinery: - Designed for mounting on road vehicles | NMB | Free | CCCT, LDCT |
| 8428.90.00 | 11 | Other lifting, handling, loading or unloading machinery (for example, lifts, escalators, conveyors, teleferics). - Other machinery - Well drilling derricks; Well servicing rigs; Self-propelled crawler mounted pipelayers: - Well drilling derricks | NMB | Free | CCCT, LDCT |
| 8428.90.00 | 12 | Other lifting, handling, loading or unloading machinery (for example, lifts, escalators, conveyors, teleferics). - Other machinery - Well drilling derricks; Well servicing rigs; Self-propelled crawler mounted pipelayers: - Well servicing rigs | NMB | Free | CCCT, LDCT |
| 8428.90.00 | 13 | Other lifting, handling, loading or unloading machinery (for example, lifts, escalators, conveyors, teleferics). - Other machinery - Well drilling derricks; Well servicing rigs; Self-propelled crawler mounted pipelayers: - Self-propelled crawler mounted pipelayers | NMB | Free | CCCT, LDCT |
| 8429.51.00 | 11 | Self-propelled bulldozers, angledozers, graders, levellers, scrapers, mechanical shovels, excavators, shovel loaders, tamping machines and road rollers. - Mechanical shovels, excavators and shovel loaders: - Front-end shovel loaders - Wheeled front-end loaders, designed to be fitted with a bucket, having a capacity, for general purpose use, exceeding 12.3 m³: - New, 2 wheel drive, rear engine mounted | NMB | Free | CCCT, LDCT |
| 8429.51.00 | 12 | Self-propelled bulldozers, angledozers, graders, levellers, scrapers, mechanical shovels, excavators, shovel loaders, tamping machines and road rollers. - Mechanical shovels, excavators and shovel loaders: - Front-end shovel loaders - Wheeled front-end loaders, designed to be fitted with a bucket, having a capacity, for general purpose use, exceeding 12.3 m³: - New, 4 wheel drive, rear engine mounted | NMB | Free | CCCT, LDCT |
| 8429.51.00 | 30 | Self-propelled bulldozers, angledozers, graders, levellers, scrapers, mechanical shovels, excavators, shovel loaders, tamping machines and road rollers. - Mechanical shovels, excavators and shovel loaders: - Front-end shovel loaders - Wheeled front-end loaders, designed to be fitted with a bucket, having a capacity, for general purpose use, not exceeding 12.3 m³, new, two wheel drive, rear engine mounted | NMB | Free | CCCT, LDCT |
| 8429.51.00 | 41 | Self-propelled bulldozers, angledozers, graders, levellers, scrapers, mechanical shovels, excavators, shovel loaders, tamping machines and road rollers. - Mechanical shovels, excavators and shovel loaders: - Front-end shovel loaders - Wheeled front-end loaders, designed to be fitted with a bucket, having a capacity, for general purpose use, not exceeding 12.3 m³, new, four wheel drive, rear engine mounted, with a bucket capacity of: - Less than 1.5 m³ | NMB | Free | CCCT, LDCT |
| 8429.51.00 | 42 | Self-propelled bulldozers, angledozers, graders, levellers, scrapers, mechanical shovels, excavators, shovel loaders, tamping machines and road rollers. - Mechanical shovels, excavators and shovel loaders: - Front-end shovel loaders - Wheeled front-end loaders, designed to be fitted with a bucket, having a capacity, for general purpose use, not exceeding 12.3 m³, new, four wheel drive, rear engine mounted, with a bucket capacity of: - 1.5 m³ or more but less than 2.2 m³ | NMB | Free | CCCT, LDCT |
| 8429.51.00 | 43 | Self-propelled bulldozers, angledozers, graders, levellers, scrapers, mechanical shovels, excavators, shovel loaders, tamping machines and road rollers. - Mechanical shovels, excavators and shovel loaders: - Front-end shovel loaders - Wheeled front-end loaders, designed to be fitted with a bucket, having a capacity, for general purpose use, not exceeding 12.3 m³, new, four wheel drive, rear engine mounted, with a bucket capacity of: - 2.2 m³ or more but less than 2.9 m³ | NMB | Free | CCCT, LDCT |
| 8429.51.00 | 44 | Self-propelled bulldozers, angledozers, graders, levellers, scrapers, mechanical shovels, excavators, shovel loaders, tamping machines and road rollers. - Mechanical shovels, excavators and shovel loaders: - Front-end shovel loaders - Wheeled front-end loaders, designed to be fitted with a bucket, having a capacity, for general purpose use, not exceeding 12.3 m³, new, four wheel drive, rear engine mounted, with a bucket capacity of: - 2.9 m³ or more but less than 3.8 m³ | NMB | Free | CCCT, LDCT |
| 8429.51.00 | 45 | Self-propelled bulldozers, angledozers, graders, levellers, scrapers, mechanical shovels, excavators, shovel loaders, tamping machines and road rollers. - Mechanical shovels, excavators and shovel loaders: - Front-end shovel loaders - Wheeled front-end loaders, designed to be fitted with a bucket, having a capacity, for general purpose use, not exceeding 12.3 m³, new, four wheel drive, rear engine mounted, with a bucket capacity of: - 3.8 m³ or more but less than 5.2 m³ | NMB | Free | CCCT, LDCT |
| 8429.51.00 | 46 | Self-propelled bulldozers, angledozers, graders, levellers, scrapers, mechanical shovels, excavators, shovel loaders, tamping machines and road rollers. - Mechanical shovels, excavators and shovel loaders: - Front-end shovel loaders - Wheeled front-end loaders, designed to be fitted with a bucket, having a capacity, for general purpose use, not exceeding 12.3 m³, new, four wheel drive, rear engine mounted, with a bucket capacity of: - 5.2 m³ or more but less than 7.6 m³ | NMB | Free | CCCT, LDCT |
| 8429.51.00 | 47 | Self-propelled bulldozers, angledozers, graders, levellers, scrapers, mechanical shovels, excavators, shovel loaders, tamping machines and road rollers. - Mechanical shovels, excavators and shovel loaders: - Front-end shovel loaders - Wheeled front-end loaders, designed to be fitted with a bucket, having a capacity, for general purpose use, not exceeding 12.3 m³, new, four wheel drive, rear engine mounted, with a bucket capacity of: - 7.6 m³ or more but less than 11.4 m³ | NMB | Free | CCCT, LDCT |
| 8429.51.00 | 48 | Self-propelled bulldozers, angledozers, graders, levellers, scrapers, mechanical shovels, excavators, shovel loaders, tamping machines and road rollers. - Mechanical shovels, excavators and shovel loaders: - Front-end shovel loaders - Wheeled front-end loaders, designed to be fitted with a bucket, having a capacity, for general purpose use, not exceeding 12.3 m³, new, four wheel drive, rear engine mounted, with a bucket capacity of: - 11.4 m³ or more but not exceeding 12.3 m³ | NMB | Free | CCCT, LDCT |
| 8429.52.00 | 31 | Self-propelled bulldozers, angledozers, graders, levellers, scrapers, mechanical shovels, excavators, shovel loaders, tamping machines and road rollers. - Mechanical shovels, excavators and shovel loaders: - Machinery with a 360° revolving superstructure - Crawler mounted backhoes, shovels and clamshells, new: - Hydraulic | NMB | Free | CCCT, LDCT |
| 8429.52.00 | 39 | Self-propelled bulldozers, angledozers, graders, levellers, scrapers, mechanical shovels, excavators, shovel loaders, tamping machines and road rollers. - Mechanical shovels, excavators and shovel loaders: - Machinery with a 360° revolving superstructure - Crawler mounted backhoes, shovels and clamshells, new: - Other | NMB | Free | CCCT, LDCT |
| 8430.41.00 | 20 | Other moving, grading, levelling, scraping, excavating, tamping, compacting, extracting or boring machinery, for earth, minerals or ores; pile-drivers and pile-extractors; snow-ploughs and snow-blowers. - Other boring or sinking machinery: - Self-propelled - Pneumatic mounted percussion type rock drills, for underground use; Stoper drills, with a piston diameter exceeding 8.25 cm, to be employed in the exploration or drilling for oil, natural gas, minerals or water; Pneumatic or electro-hydraulic jumbo drills, mounted on rubber-tired wheels; Cable tool rigs, for drilling water wells, capable of drilling in excess of 381 m | NMB | Free | CCCT, LDCT |
| 8430.49.00 | 20 | Other moving, grading, levelling, scraping, excavating, tamping, compacting, extracting or boring machinery, for earth, minerals or ores; pile-drivers and pile-extractors; snow-ploughs and snow-blowers. - Other boring or sinking machinery: - Other - Pneumatic mounted percussion type rock drills, for underground use; Stoper drills, with a piston diameter exceeding 8.25 cm, to be employed in the exploration or drilling for oil, natural gas, minerals or water; Pneumatic or electro-hydraulic jumbo drills, mounted on rubber-tired wheels; Cable tool rigs, for drilling water wells, capable of drilling in excess of 381 m | NMB | Free | CCCT, LDCT |
Harmonized Tariff Schedule of the Canada inquiry: aircraft+parts
