| 8413.70.10 | 21 | Pumps for liquids, whether or not fitted with a measuring device; liquid elevators. - Other centrifugal pumps - Battery operated, for recreational vehicles and boats;
Canned rotor;
De-foaming type;
Drinking fountain;
For food, pharmaceutical or similar applications;
For swimming pools;
Heat transfer, oil type;
Magnetic drive chemical;
Milk;
Molten metal;
Multi-stage single suction, with head over 5,516 kPa;
Of a power not exceeding 250 kW, for pulp manufacturing;
Portable, engine type, capable of producing a minimum pressure boost of 1,034 kPa, maintaining a flow rate exceeding 700 l/m at that pressure;
Solar powered;
Submersible slurry, agitator type;
Transformer oil circulation pumps;
Vertical slurry, of cantilever shaft design, having a pump discharge flange size of a diameter of 50.8 cm or more, for track-laying machines to be employed in mining, recovering and producing crude oil from shales, oil-sands or tar-sands;
With speed variators, for the wine and juice making industries - Multi-stage single suction pumps with head over 5,516 kPa: - To be employed in the exploration, discovery, development, maintenance, testing, depletion or production of water, oil or natural gas wells, in mining or quarrying, or in the distillation or recovery of products from natural gas | NMB | Free | CCCT, LDCT |
| 8413.70.10 | 29 | Pumps for liquids, whether or not fitted with a measuring device; liquid elevators. - Other centrifugal pumps - Battery operated, for recreational vehicles and boats;
Canned rotor;
De-foaming type;
Drinking fountain;
For food, pharmaceutical or similar applications;
For swimming pools;
Heat transfer, oil type;
Magnetic drive chemical;
Milk;
Molten metal;
Multi-stage single suction, with head over 5,516 kPa;
Of a power not exceeding 250 kW, for pulp manufacturing;
Portable, engine type, capable of producing a minimum pressure boost of 1,034 kPa, maintaining a flow rate exceeding 700 l/m at that pressure;
Solar powered;
Submersible slurry, agitator type;
Transformer oil circulation pumps;
Vertical slurry, of cantilever shaft design, having a pump discharge flange size of a diameter of 50.8 cm or more, for track-laying machines to be employed in mining, recovering and producing crude oil from shales, oil-sands or tar-sands;
With speed variators, for the wine and juice making industries - Multi-stage single suction pumps with head over 5,516 kPa: - Other | NMB | Free | CCCT, LDCT |
| 8413.70.10 | 90 | Pumps for liquids, whether or not fitted with a measuring device; liquid elevators. - Other centrifugal pumps - Battery operated, for recreational vehicles and boats;
Canned rotor;
De-foaming type;
Drinking fountain;
For food, pharmaceutical or similar applications;
For swimming pools;
Heat transfer, oil type;
Magnetic drive chemical;
Milk;
Molten metal;
Multi-stage single suction, with head over 5,516 kPa;
Of a power not exceeding 250 kW, for pulp manufacturing;
Portable, engine type, capable of producing a minimum pressure boost of 1,034 kPa, maintaining a flow rate exceeding 700 l/m at that pressure;
Solar powered;
Submersible slurry, agitator type;
Transformer oil circulation pumps;
Vertical slurry, of cantilever shaft design, having a pump discharge flange size of a diameter of 50.8 cm or more, for track-laying machines to be employed in mining, recovering and producing crude oil from shales, oil-sands or tar-sands;
With speed variators, for the wine and juice making industries - Other | NMB | Free | CCCT, LDCT |
| 8415.82.91 | | Air conditioning machines, comprising a motor-driven fan and elements for changing the temperature and humidity, including those machines in which the humidity cannot be separately regulated. - Other: - Other, incorporating a refrigerating unit - Other: - Central station air handlers;Combination terminal units, water source or air to air, of a heat transfer capacity not exceeding 5.8 kW (19,800 BTU per hour);Fan coil units;For off-highway vehicles;For humidity and dust sensitive areas, of a heat transfer capacity not exceeding 71.1 kW (242,700 BTU per hour);Single packaged, combination, of a heat transfer capacity not exceeding 15.8 kW (53,900 BTU per hour);Split-system, of a heat transfer capacity not exceeding 47.4 kW (161,800 per hour);Water source, of a heat transfer capacity not exceeding 34.8 kW (118,700 BTU per hour) | NMB | 6% | AUT, NZT, |
| 8415.82.91 | 10 | Air conditioning machines, comprising a motor-driven fan and elements for changing the temperature and humidity, including those machines in which the humidity cannot be separately regulated. - Other: - Other, incorporating a refrigerating unit - Other: - Central station air handlers;Combination terminal units, water source or air to air, of a heat transfer capacity not exceeding 5.8 kW (19,800 BTU per hour);Fan coil units;For off-highway vehicles;For humidity and dust sensitive areas, of a heat transfer capacity not exceeding 71.1 kW (242,700 BTU per hour);Single packaged, combination, of a heat transfer capacity not exceeding 15.8 kW (53,900 BTU per hour);Split-system, of a heat transfer capacity not exceeding 47.4 kW (161,800 per hour);Water source, of a heat transfer capacity not exceeding 34.8 kW (118,700 BTU per hour)
- Central station air handlers | NMB | 6% | AUT, NZT, |
| 8415.82.91 | 20 | Air conditioning machines, comprising a motor-driven fan and elements for changing the temperature and humidity, including those machines in which the humidity cannot be separately regulated. - Other: - Other, incorporating a refrigerating unit - Other: - Central station air handlers;Combination terminal units, water source or air to air, of a heat transfer capacity not exceeding 5.8 kW (19,800 BTU per hour);Fan coil units;For off-highway vehicles;For humidity and dust sensitive areas, of a heat transfer capacity not exceeding 71.1 kW (242,700 BTU per hour);Single packaged, combination, of a heat transfer capacity not exceeding 15.8 kW (53,900 BTU per hour);Split-system, of a heat transfer capacity not exceeding 47.4 kW (161,800 per hour);Water source, of a heat transfer capacity not exceeding 34.8 kW (118,700 BTU per hour)
- Fan coil units | NMB | 6% | AUT, NZT, |
| 8415.82.99 | 11 | Air conditioning machines, comprising a motor-driven fan and elements for changing the temperature and humidity, including those machines in which the humidity cannot be separately regulated. - Other: - Other, incorporating a refrigerating unit - Other: - Other - Single packaged combination and split system (remote condenser type) air conditioners, other than year-round units: - Single packaged, combination, of a heat transfer capacity exceeding 15.8 kW (53,900 BTU per hour) | NMB | Free | CCCT, LDCT |
| 8528.72.20 | 00 | Monitors and projectors, not incorporating television reception apparatus; reception apparatus for television, whether or not incorporating radio-broadcast receivers or sound or video recording or reproducing apparatus. - Reception apparatus for television, whether or not incorporating radio-broadcast receivers or sound or video recording or reproducing apparatus: - Other, colour - Incomplete or unfinished television receivers, including assemblies for television receivers consisting of video intermediate (IF) amplifying and detecting systems, video processing and amplification systems, synchronizing and deflection circuitry, tuners and tuner control systems, and audio detection and amplification systems plus a power supply, but not incorporating a cathode-ray tube, flat panel screen or similar display | NMB | Free | AUT, NZT, |
| 8418.99.10 | 00 | Refrigerators, freezers and other refrigerating or freezing equipment, electric or other; heat pumps other than air conditioning machines of heading 84.15.
- Parts: - Other - Door assemblies incorporating at least two of the following: inner panel, outer panel, insulation, hinges or handles | - | Free | CCCT, LDCT |
| 8419.50.00 | 10 | Machinery, plant or laboratory equipment, whether or not electrically heated (excluding furnaces, ovens and other equipment of heading 85.14), for the treatment of materials by a process involving a change of temperature such as heating, cooking, roasting, distilling, rectifying, sterilizing, pasteurizing, steaming, drying, evaporating, vaporizing, condensing or cooling, other than machinery or plant of a kind used for domestic purposes; instantaneous or storage water heaters, non-electric.
- Heat exchange units - Braised aluminum heat exchangers for cryogenic services, to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of water, oil or natural gas wells, in mining or quarrying, or in the distillation or recovery of products from natural gas | NMB | Free | CCCT, LDCT |
| 8421.29.00 | 10 | Centrifuges, including centrifugal dryers; filtering or purifying machinery and apparatus, for liquids or gases. - Filtering or purifying machinery and apparatus for liquids: - Other - Filter presses, to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells | NMB | Free | CCCT, LDCT |
| 98.25 | | Goods imported by mail or courier for personal or household use.
The following goods are not eligible for classification under this heading: goods or classes of goods that, on importation, may be released only in accordance with the accounting provisions of the Customs Act or the applicable regulations on condition that the importer or owner of the goods provides, before the release of the goods, any certificate, licence, permit or other document and any information that is required under any Act of Parliament or any regulation made under such an Act that prohibits, controls or regulates the importation of goods, but this exclusion from eligibility for classification does not apply to any goods imported under the authority of and in accordance with a general import permit issued under subsection 8(1.1) or section 8.3 of the Export and Import Permits Act.
The value of goods imported that are eligible to be classified under this heading shall not exceed $500.
The following goods are not eligible for classification under tariff item No. 9825.10.00, 9825.20.00 or 9825.30.00: alcoholic beverages; tobacco; tobacco products; goods subject to any additional customs duty under sections 21.1 to 22 of this Act; goods subject to any tax imposed under subsection 23(1) of the Excise Tax Act; goods in respect of which tax is not payable under Division III of Part IX of that Act; and goods in respect of which tax is payable under section 212.1 of that Act if an amount must be deducted from that tax under section 214.1 of that Act. | | | |
| 9825.10.00 | | Goods imported by mail or courier for personal or household use.
The following goods are not eligible for classification under this heading: goods or classes of goods that, on importation, may be released only in accordance with the accounting provisions of the Customs Act or the applicable regulations on condition that the importer or owner of the goods provides, before the release of the goods, any certificate, licence, permit or other document and any information that is required under any Act of Parliament or any regulation made under such an Act that prohibits, controls or regulates the importation of goods, but this exclusion from eligibility for classification does not apply to any goods imported under the authority of and in accordance with a general import permit issued under subsection 8(1.1) or section 8.3 of the Export and Import Permits Act.
The value of goods imported that are eligible to be classified under this heading shall not exceed $500.
The following goods are not eligible for classification under tariff item No. 9825.10.00, 9825.20.00 or 9825.30.00: alcoholic beverages; tobacco; tobacco products; goods subject to any additional customs duty under sections 21.1 to 22 of this Act; goods subject to any tax imposed under subsection 23(1) of the Excise Tax Act; goods in respect of which tax is not payable under Division III of Part IX of that Act; and goods in respect of which tax is payable under section 212.1 of that Act if an amount must be deducted from that tax under section 214.1 of that Act. - Goods which, if classified in accordance with the provisions of Chapters 1 to 97, would be subject to a rate of customs duty under the Most-Favoured-Nation Tariff that is not more than 5 percentage points greater or less than the rate provided by this tariff item under the Most-Favoured-Nation Tariff. | | 20% | UST, MT, M |
| 8430.41.00 | 50 | Other moving, grading, levelling, scraping, excavating, tamping, compacting, extracting or boring machinery, for earth, minerals or ores; pile-drivers and pile-extractors; snow-ploughs and snow-blowers. - Other boring or sinking machinery: - Self-propelled - Drilling or work-over rigs, to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells or potash or rock salt deposits | NMB | Free | CCCT, LDCT |
| 8430.49.00 | 51 | Other moving, grading, levelling, scraping, excavating, tamping, compacting, extracting or boring machinery, for earth, minerals or ores; pile-drivers and pile-extractors; snow-ploughs and snow-blowers. - Other boring or sinking machinery: - Other - Drilling or work-over rigs, to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells or potash or rock salt deposits: - Rotary, oil and gas field drilling | NMB | Free | CCCT, LDCT |
| 8430.49.00 | 52 | Other moving, grading, levelling, scraping, excavating, tamping, compacting, extracting or boring machinery, for earth, minerals or ores; pile-drivers and pile-extractors; snow-ploughs and snow-blowers. - Other boring or sinking machinery: - Other - Drilling or work-over rigs, to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells or potash or rock salt deposits: - Other, oil and gas field drilling | NMB | Free | CCCT, LDCT |
| 8430.49.00 | 59 | Other moving, grading, levelling, scraping, excavating, tamping, compacting, extracting or boring machinery, for earth, minerals or ores; pile-drivers and pile-extractors; snow-ploughs and snow-blowers. - Other boring or sinking machinery: - Other - Drilling or work-over rigs, to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells or potash or rock salt deposits: - Other | NMB | Free | CCCT, LDCT |
| 8443.31.00 | 00 | Printing machinery used for printing by means of plates, cylinders and other printing components of heading 84.42; other printers, copying machines and facsimile machines, whether or not combined; parts and accessories thereof.
- Other printers, copying machines and facsimile machines, whether or not combined: - Machines which perform two or more of the functions of printing, copying or facsimile transmission, capable of connecting to an automatic data processing machine or to a network | NMB | Free | CCCT, LDCT |
| 8479.89.10 | 00 | Machines and mechanical appliances having individual functions, not specified or included elsewhere in this Chapter. - Other machines and mechanical appliances: - Other - Aircraft ground use continuous flow jet engine start units; Artificial fog or smoke generators; Automatic loaders for small arms ammunition; Automotive relay assembly lines; Box dumpers for use with fresh fruit or fresh vegetables; Cathode assembly systems; Coating plant with thermal waste gas purification plant; Coin control devices, of iron or steel, for apparatus, other than telephones, which vends merchandise, services or tickets; Condenser tube cleaning systems; Double-sided printed circuit board coating systems; Dry solder mask processing lines for printed circuit board production; Fishing tools or well fracturing machines and appliances to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells or for use in drilling machinery to be employed in the exploration, discovery, development or operation of potash or rock salt deposits; Horizontal solder levelling systems for printed circuit board production; Initial fluid filling machines for automobiles; Laboratory jet dyeing machines; Liquid solder mask coater processing lines for printed circuit board production; Low volume needle or taper nozzle fluid dispensers; Machinery to be employed in the manufacture of pharmaceutical goods; Machines to be employed in the manufacture of slide fasteners, tooth brushes or Venetian blinds; Machines for use by printers, lithographers, bookbinders, paper or foil converters, manufacturers of stereotypes, electrotypes or printing plates or rolls, or by manufacturers of articles made from paper, paperboard or foil; Multilayer registration systems for printed circuit board production; On-line capsule inspection systems; Pipe scraping systems for cleaning; Powder presses for X-ray diffraction samples; Printed circuit board conveyorized washing and drying machines; Railcar door openers or pullers; Rider type scrubbers or polishers; Scallop attachment machines; Shot shell cartridge loaders; Tape embossing machines; Textile or plastic separator systems for footwear manufacture; Tin strip etch lines for printed circuit board production; Trailer mounted jet air start units; Ultrasonic cleaners excluding those for washing cases | NMB | Free | CCCT, LDCT |
| 8481.10.00 | 10 | Taps, cocks, valves and similar appliances for pipes, boiler shells, tanks, vats or the like, including pressure-reducing valves and thermostatically controlled valves. - Pressure-reducing valves - For gas-fired apparatus for cooking, heating buildings or water, or for refrigeration, including such valves used in the gas line between such apparatus and the meter or in the gas line between such apparatus and the consumer's gas storage device | NMB | Free | CCCT, LDCT |
| 84.84 | | Gaskets and similar joints of metal sheeting combined with other material or of two or more layers of metal; sets or assortments of gaskets and similar joints, dissimilar in composition, put up in pouches, envelopes or similar packings; mechanical seals. | | | |
| 8484.10.00 | 00 | Gaskets and similar joints of metal sheeting combined with other material or of two or more layers of metal; sets or assortments of gaskets and similar joints, dissimilar in composition, put up in pouches, envelopes or similar packings; mechanical seals. - Gaskets and similar joints of metal sheeting combined with other material or of two or more layers of metal | - | Free | CCCT, LDCT |
| 8484.20.00 | 00 | Gaskets and similar joints of metal sheeting combined with other material or of two or more layers of metal; sets or assortments of gaskets and similar joints, dissimilar in composition, put up in pouches, envelopes or similar packings; mechanical seals. - Mechanical seals | - | Free | CCCT, LDCT |
| 8484.90.00 | 00 | Gaskets and similar joints of metal sheeting combined with other material or of two or more layers of metal; sets or assortments of gaskets and similar joints, dissimilar in composition, put up in pouches, envelopes or similar packings; mechanical seals. - Other | - | Free | CCCT, LDCT |
| 9825.20 | | Goods imported by mail or courier for personal or household use.
The following goods are not eligible for classification under this heading: goods or classes of goods that, on importation, may be released only in accordance with the accounting provisions of the Customs Act or the applicable regulations on condition that the importer or owner of the goods provides, before the release of the goods, any certificate, licence, permit or other document and any information that is required under any Act of Parliament or any regulation made under such an Act that prohibits, controls or regulates the importation of goods, but this exclusion from eligibility for classification does not apply to any goods imported under the authority of and in accordance with a general import permit issued under subsection 8(1.1) or section 8.3 of the Export and Import Permits Act.
The value of goods imported that are eligible to be classified under this heading shall not exceed $500.
The following goods are not eligible for classification under tariff item No. 9825.10.00, 9825.20.00 or 9825.30.00: alcoholic beverages; tobacco; tobacco products; goods subject to any additional customs duty under sections 21.1 to 22 of this Act; goods subject to any tax imposed under subsection 23(1) of the Excise Tax Act; goods in respect of which tax is not payable under Division III of Part IX of that Act; and goods in respect of which tax is payable under section 212.1 of that Act if an amount must be deducted from that tax under section 214.1 of that Act. - Goods which, if classified in accordance with the provisions of Chapters 1 to 97, would be subject to a rate of customs duty under the Most-Favoured-Nation Tariff that is not more than 5 percentage points greater or less than the rate provided by this tariff item under the Most-Favoured-Nation Tariff. | | | |
Harmonized Tariff Schedule of the Canada inquiry: aircraft+parts
