| 7326.90.10 | 60 | Other articles of iron or steel. - Other - Couplings for sucker rods, pony rods or polished rods for oilfield related pumps;Fishing tools and parts thereof to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells or for drilling machinery employed in the exploration, discovery, development or operation of potash or rock salt deposits;For climbing or mountaineering;For keeping nets open and swivels, to be employed in commercial fishing or in the commercial harvesting of marine plants;For use in the manufacture of detectors for propane or other toxic fumes;For use in the manufacture of fire fighting vehicles;For use in the manufacture of goods of Section XVI or of Chapter 73, such goods being used in the recovery or production of crude oil from shales, oil-sands or tar-sands;For use in the manufacture or repair of engines or parts thereof for commercial fishing vessels;Forged steel clevis hooks and eye hooks for use in the manufacture of debris chutes;Identification bands for migratory birds;Pitless well heads and parts thereof;Reusable containers, specially designed to be employed in the transportation of motor vehicle components which are free of customs duties, presented with the goods therein;Seat post clamps and cable hangers for use in the manufacture of unicycles, bicycles or tricycles;Semi-elliptical heads, of an external diameter of either 609.6 mm or 762 mm, to specification ASTM A455, for use in air compressor tanks;Snap hooks of forged steel, zinc plated, 12.5 cm to 23 cm in length, for use in the manufacture of debris chutes and chute hoists;Steel stanchions for confining livestock either in pens or individually;The following to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells or potash or rock salt deposits:Flanged casing heads;Screwed casing heads for surface casings of an external diameter exceeding 273 mm, or rated for service in working pressures exceeding 14 MPa W.O.G. (water, oil, gas);Well packers and parts thereof;To be employed in the processing, storing or insemination of animal semen;Tracks for use in the manufacture of skid steer loaders;Vacuum evaporator masks, of stainless steel, having a 90% front etch and 10% back etch, for the production of photo cells;Wick sustainers for use in the manufacture of candles
- Vacuum evaporator masks, of stainless steel, having a 90% front etch and a 10% back etch, for the production of photo cells | - | | |
| 7326.90.10 | 70 | Other articles of iron or steel. - Other - Couplings for sucker rods, pony rods or polished rods for oilfield related pumps;Fishing tools and parts thereof to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells or for drilling machinery employed in the exploration, discovery, development or operation of potash or rock salt deposits;For climbing or mountaineering;For keeping nets open and swivels, to be employed in commercial fishing or in the commercial harvesting of marine plants;For use in the manufacture of detectors for propane or other toxic fumes;For use in the manufacture of fire fighting vehicles;For use in the manufacture of goods of Section XVI or of Chapter 73, such goods being used in the recovery or production of crude oil from shales, oil-sands or tar-sands;For use in the manufacture or repair of engines or parts thereof for commercial fishing vessels;Forged steel clevis hooks and eye hooks for use in the manufacture of debris chutes;Identification bands for migratory birds;Pitless well heads and parts thereof;Reusable containers, specially designed to be employed in the transportation of motor vehicle components which are free of customs duties, presented with the goods therein;Seat post clamps and cable hangers for use in the manufacture of unicycles, bicycles or tricycles;Semi-elliptical heads, of an external diameter of either 609.6 mm or 762 mm, to specification ASTM A455, for use in air compressor tanks;Snap hooks of forged steel, zinc plated, 12.5 cm to 23 cm in length, for use in the manufacture of debris chutes and chute hoists;Steel stanchions for confining livestock either in pens or individually;The following to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells or potash or rock salt deposits:Flanged casing heads;Screwed casing heads for surface casings of an external diameter exceeding 273 mm, or rated for service in working pressures exceeding 14 MPa W.O.G. (water, oil, gas);Well packers and parts thereof;To be employed in the processing, storing or insemination of animal semen;Tracks for use in the manufacture of skid steer loaders;Vacuum evaporator masks, of stainless steel, having a 90% front etch and 10% back etch, for the production of photo cells;Wick sustainers for use in the manufacture of candles
- Semi-elliptical heads, of an external diameter of either 609.6 mm or
762 mm, to specification ASTM A455, for use in air compressor tanks | - | | |
| 7326.90.10 | 80 | Other articles of iron or steel. - Other - Couplings for sucker rods, pony rods or polished rods for oilfield related pumps;Fishing tools and parts thereof to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells or for drilling machinery employed in the exploration, discovery, development or operation of potash or rock salt deposits;For climbing or mountaineering;For keeping nets open and swivels, to be employed in commercial fishing or in the commercial harvesting of marine plants;For use in the manufacture of detectors for propane or other toxic fumes;For use in the manufacture of fire fighting vehicles;For use in the manufacture of goods of Section XVI or of Chapter 73, such goods being used in the recovery or production of crude oil from shales, oil-sands or tar-sands;For use in the manufacture or repair of engines or parts thereof for commercial fishing vessels;Forged steel clevis hooks and eye hooks for use in the manufacture of debris chutes;Identification bands for migratory birds;Pitless well heads and parts thereof;Reusable containers, specially designed to be employed in the transportation of motor vehicle components which are free of customs duties, presented with the goods therein;Seat post clamps and cable hangers for use in the manufacture of unicycles, bicycles or tricycles;Semi-elliptical heads, of an external diameter of either 609.6 mm or 762 mm, to specification ASTM A455, for use in air compressor tanks;Snap hooks of forged steel, zinc plated, 12.5 cm to 23 cm in length, for use in the manufacture of debris chutes and chute hoists;Steel stanchions for confining livestock either in pens or individually;The following to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells or potash or rock salt deposits:Flanged casing heads;Screwed casing heads for surface casings of an external diameter exceeding 273 mm, or rated for service in working pressures exceeding 14 MPa W.O.G. (water, oil, gas);Well packers and parts thereof;To be employed in the processing, storing or insemination of animal semen;Tracks for use in the manufacture of skid steer loaders;Vacuum evaporator masks, of stainless steel, having a 90% front etch and 10% back etch, for the production of photo cells;Wick sustainers for use in the manufacture of candles
- Tracks, for use in the manufacture of skid steer loaders | - | | |
| 7326.90.10 | 90 | Other articles of iron or steel. - Other - Couplings for sucker rods, pony rods or polished rods for oilfield related pumps;Fishing tools and parts thereof to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells or for drilling machinery employed in the exploration, discovery, development or operation of potash or rock salt deposits;For climbing or mountaineering;For keeping nets open and swivels, to be employed in commercial fishing or in the commercial harvesting of marine plants;For use in the manufacture of detectors for propane or other toxic fumes;For use in the manufacture of fire fighting vehicles;For use in the manufacture of goods of Section XVI or of Chapter 73, such goods being used in the recovery or production of crude oil from shales, oil-sands or tar-sands;For use in the manufacture or repair of engines or parts thereof for commercial fishing vessels;Forged steel clevis hooks and eye hooks for use in the manufacture of debris chutes;Identification bands for migratory birds;Pitless well heads and parts thereof;Reusable containers, specially designed to be employed in the transportation of motor vehicle components which are free of customs duties, presented with the goods therein;Seat post clamps and cable hangers for use in the manufacture of unicycles, bicycles or tricycles;Semi-elliptical heads, of an external diameter of either 609.6 mm or 762 mm, to specification ASTM A455, for use in air compressor tanks;Snap hooks of forged steel, zinc plated, 12.5 cm to 23 cm in length, for use in the manufacture of debris chutes and chute hoists;Steel stanchions for confining livestock either in pens or individually;The following to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells or potash or rock salt deposits:Flanged casing heads;Screwed casing heads for surface casings of an external diameter exceeding 273 mm, or rated for service in working pressures exceeding 14 MPa W.O.G. (water, oil, gas);Well packers and parts thereof;To be employed in the processing, storing or insemination of animal semen;Tracks for use in the manufacture of skid steer loaders;Vacuum evaporator masks, of stainless steel, having a 90% front etch and 10% back etch, for the production of photo cells;Wick sustainers for use in the manufacture of candles
- Other | - | | |
| 8407.21.00 | 00 | Spark-ignition reciprocating or rotary internal combustion piston engines. - Marine propulsion engines: - Outboard motors | NMB | Free | CCCT, LDCT |
| 8411.12.00 | 90 | Turbo-jets, turbo-propellers and other gas turbines. - Turbo-jets: - Of a thrust exceeding 25 kN - Other | NMB | Free | CCCT, LDCT |
| 8411.21.00 | 00 | Turbo-jets, turbo-propellers and other gas turbines. - Turbo-propellers: - Of a power not exceeding 1,100 kW | NMB | Free | CCCT, LDCT |
| 8411.22.00 | 00 | Turbo-jets, turbo-propellers and other gas turbines. - Turbo-propellers: - Of a power exceeding 1,100 kW | NMB | Free | CCCT, LDCT |
| 8407.29 | | Spark-ignition reciprocating or rotary internal combustion piston engines. - Marine propulsion engines: - Other | | | |
| 8407.29.10 | 00 | Spark-ignition reciprocating or rotary internal combustion piston engines. - Marine propulsion engines: - Other - Inboard-outboard engines | NMB | Free | CCCT, LDCT |
| 8407.29.20 | 00 | Spark-ignition reciprocating or rotary internal combustion piston engines. - Marine propulsion engines: - Other - Inboard engines | NMB | 6% | CCCT, LDCT |
| 8411.81.00 | 10 | Turbo-jets, turbo-propellers and other gas turbines. - Other gas turbines: - Of a power not exceeding 5,000 kW - Aircraft turbines | NMB | Free | CCCT, LDCT |
| 8411.81.00 | 90 | Turbo-jets, turbo-propellers and other gas turbines. - Other gas turbines: - Of a power not exceeding 5,000 kW - Other | NMB | Free | CCCT, LDCT |
| 8411.82 | | Turbo-jets, turbo-propellers and other gas turbines. - Other gas turbines: - Of a power exceeding 5,000 kW | | | |
| 8411.82.90 | | Turbo-jets, turbo-propellers and other gas turbines. - Other gas turbines: - Of a power exceeding 5,000 kW - Other | NMB | 2.5% | CCCT, LDCT |
| 8411.82.90 | 90 | Turbo-jets, turbo-propellers and other gas turbines. - Other gas turbines: - Of a power exceeding 5,000 kW - Other - Other | NMB | 2.5% | CCCT, LDCT |
| 8413.11.10 | 00 | Pumps for liquids, whether or not fitted with a measuring device; liquid elevators. - Pumps fitted or designed to be fitted with a measuring device: - Pumps for dispensing fuel or lubricants, of the type used in filling-stations or in garages - For dispensing gasoline, diesel fuel, liquid natural gas or liquid propane | NMB | 6% | CCCT, LDCT |
| 8413.30.00 | 14 | Pumps for liquids, whether or not fitted with a measuring device; liquid elevators. - Fuel, lubricating or cooling medium pumps for internal combustion piston engines - Fuel injection pumps, for diesel or semi-diesel engines; Pumps, for marine propulsion engines of the following types: semi-diesel engines, diesel dual fuel engines, diesel engines of a power not exceeding 74.6 kW per cylinder or of a power exceeding 207.3 kW per cylinder, regardless of cylinder displacement, diesel engines with a displacement of less than 8,193.5 cm³ per cylinder: - For engines for motor vehicles of Chapter 87 | NMB | Free | CCCT, LDCT |
| 8427.10.90 | | Fork-lift trucks; other works trucks fitted with lifting or handling equipment. - Self-propelled trucks powered by an electric motor - Other: - Other | NMB | Free | CCCT, LDCT |
| 8413.30.00 | 19 | Pumps for liquids, whether or not fitted with a measuring device; liquid elevators. - Fuel, lubricating or cooling medium pumps for internal combustion piston engines - Fuel injection pumps, for diesel or semi-diesel engines; Pumps, for marine propulsion engines of the following types: semi-diesel engines, diesel dual fuel engines, diesel engines of a power not exceeding 74.6 kW per cylinder or of a power exceeding 207.3 kW per cylinder, regardless of cylinder displacement, diesel engines with a displacement of less than 8,193.5 cm³ per cylinder: - Other | NMB | Free | CCCT, LDCT |
| 8411.91.00 | 20 | Turbo-jets, turbo-propellers and other gas turbines. - Parts: - Of turbo-jets or turbo-propellers - For aircraft turbines: - For aircraft turbines | - | Free | CCCT, LDCT |
| 8411.91.00 | 90 | Turbo-jets, turbo-propellers and other gas turbines. - Parts: - Of turbo-jets or turbo-propellers - Other | - | Free | CCCT, LDCT |
| 8411.99.00 | | Turbo-jets, turbo-propellers and other gas turbines. - Parts: - Other | - | Free | CCCT, LDCT |
| 8411.99.00 | 20 | Turbo-jets, turbo-propellers and other gas turbines. - Parts: - Other - Other parts of gas turbines of tariff item No. 8411.81.00 or 8411.82.10 | - | Free | CCCT, LDCT |
| 8411.99.00 | 90 | Turbo-jets, turbo-propellers and other gas turbines. - Parts: - Other - Other | - | Free | CCCT, LDCT |
Harmonized Tariff Schedule of the Canada inquiry: aircraft+parts
