| 7321.90.10 | 29 | Stoves, ranges, grates, cookers (including those with subsidiary boilers for central heating), barbecues, braziers, gas-rings, plate warmers and similar non-electric domestic appliances, and parts thereof, of iron or steel. - Parts - Cast iron grilles, of a weight not exceeding 3 kg, not further worked than as cast, cut and ground, for use in the manufacture of finished grilles for non-industrial non-portable stoves or ranges, for gas fuel or for both gas or other fuels;For appliances, excluding cooking appliances and plate warmers;For cooking appliances and plate warmers for gas fuel or for both gas and other fuels, excluding non-portable stoves or ranges (including those specially designed for use on boats)
- For cooking appliances and plate warmers for gas fuel or for both gas and other fuels, excluding non-portable stoves or ranges (including those specially designed for use on boats): - Other | - | | |
| 7321.90.10 | 30 | Stoves, ranges, grates, cookers (including those with subsidiary boilers for central heating), barbecues, braziers, gas-rings, plate warmers and similar non-electric domestic appliances, and parts thereof, of iron or steel. - Parts - Cast iron grilles, of a weight not exceeding 3 kg, not further worked than as cast, cut and ground, for use in the manufacture of finished grilles for non-industrial non-portable stoves or ranges, for gas fuel or for both gas or other fuels;For appliances, excluding cooking appliances and plate warmers;For cooking appliances and plate warmers for gas fuel or for both gas and other fuels, excluding non-portable stoves or ranges (including those specially designed for use on boats)
- Cast iron grilles, of a weight not exceeding 3 kg, not further worked than as cast, cut and ground, for use in the manufacture of finished grilles for non-industrial non-portable stoves or ranges, for gas fuel or for both gas or other fuels | - | | |
| 7321.90.22 | 00 | Stoves, ranges, grates, cookers (including those with subsidiary boilers for central heating), barbecues, braziers, gas-rings, plate warmers and similar non-electric domestic appliances, and parts thereof, of iron or steel. - Parts - For non-portable stoves or ranges (including those specially designed for use on boats), for gas fuel or for both gas or other fuels: - Top surface panels | - | 8% | CCCT, LDCT |
| 7321.90.23 | 00 | Stoves, ranges, grates, cookers (including those with subsidiary boilers for central heating), barbecues, braziers, gas-rings, plate warmers and similar non-electric domestic appliances, and parts thereof, of iron or steel. - Parts - For non-portable stoves or ranges (including those specially designed for use on boats), for gas fuel or for both gas or other fuels: - Door assemblies, incorporating at least two of the following: inner panel, outer panel, window, insulation | - | 8% | CCCT, LDCT |
| 7321.90.24 | 00 | Stoves, ranges, grates, cookers (including those with subsidiary boilers for central heating), barbecues, braziers, gas-rings, plate warmers and similar non-electric domestic appliances, and parts thereof, of iron or steel. - Parts - For non-portable stoves or ranges (including those specially designed for use on boats), for gas fuel or for both gas or other fuels: - Oven pilot burners, top burners of other than cast iron, oven burners and lighter cones, for use in the manufacture of ranges | - | Free | CCCT, LDCT |
| 7321.90.29 | 00 | Stoves, ranges, grates, cookers (including those with subsidiary boilers for central heating), barbecues, braziers, gas-rings, plate warmers and similar non-electric domestic appliances, and parts thereof, of iron or steel. - Parts - For non-portable stoves or ranges (including those specially designed for use on boats), for gas fuel or for both gas or other fuels: - Other | - | 8% | CCCT, LDCT |
| 7321.90.90 | 00 | Stoves, ranges, grates, cookers (including those with subsidiary boilers for central heating), barbecues, braziers, gas-rings, plate warmers and similar non-electric domestic appliances, and parts thereof, of iron or steel. - Parts - Other | - | 8% | CCCT, LDCT |
| 7326.19.10 | 00 | Other articles of iron or steel. - Forged or stamped, but not further worked: - Other - Flanged wellhead tubing heads and flanged casing head spools, in the rough, for use in the manufacture of wellhead tubing heads or casing head spools, rated for service in working pressures exceeding 14 MPa W.O.G. (water, oil, gas), to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells;
Wick sustainers for use in the manufacture of candles | KGM | Free | CCCT, LDCT |
| 7326.90.10 | | Other articles of iron or steel. - Other - Couplings for sucker rods, pony rods or polished rods for oilfield related pumps;Fishing tools and parts thereof to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells or for drilling machinery employed in the exploration, discovery, development or operation of potash or rock salt deposits;For climbing or mountaineering;For keeping nets open and swivels, to be employed in commercial fishing or in the commercial harvesting of marine plants;For use in the manufacture of detectors for propane or other toxic fumes;For use in the manufacture of fire fighting vehicles;For use in the manufacture of goods of Section XVI or of Chapter 73, such goods being used in the recovery or production of crude oil from shales, oil-sands or tar-sands;For use in the manufacture or repair of engines or parts thereof for commercial fishing vessels;Forged steel clevis hooks and eye hooks for use in the manufacture of debris chutes;Identification bands for migratory birds;Pitless well heads and parts thereof;Reusable containers, specially designed to be employed in the transportation of motor vehicle components which are free of customs duties, presented with the goods therein;Seat post clamps and cable hangers for use in the manufacture of unicycles, bicycles or tricycles;Semi-elliptical heads, of an external diameter of either 609.6 mm or 762 mm, to specification ASTM A455, for use in air compressor tanks;Snap hooks of forged steel, zinc plated, 12.5 cm to 23 cm in length, for use in the manufacture of debris chutes and chute hoists;Steel stanchions for confining livestock either in pens or individually;The following to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells or potash or rock salt deposits:Flanged casing heads;Screwed casing heads for surface casings of an external diameter exceeding 273 mm, or rated for service in working pressures exceeding 14 MPa W.O.G. (water, oil, gas);Well packers and parts thereof;To be employed in the processing, storing or insemination of animal semen;Tracks for use in the manufacture of skid steer loaders;Vacuum evaporator masks, of stainless steel, having a 90% front etch and 10% back etch, for the production of photo cells;Wick sustainers for use in the manufacture of candles | - | Free | CCCT, LDCT |
| 7326.90.10 | 10 | Other articles of iron or steel. - Other - Couplings for sucker rods, pony rods or polished rods for oilfield related pumps;Fishing tools and parts thereof to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells or for drilling machinery employed in the exploration, discovery, development or operation of potash or rock salt deposits;For climbing or mountaineering;For keeping nets open and swivels, to be employed in commercial fishing or in the commercial harvesting of marine plants;For use in the manufacture of detectors for propane or other toxic fumes;For use in the manufacture of fire fighting vehicles;For use in the manufacture of goods of Section XVI or of Chapter 73, such goods being used in the recovery or production of crude oil from shales, oil-sands or tar-sands;For use in the manufacture or repair of engines or parts thereof for commercial fishing vessels;Forged steel clevis hooks and eye hooks for use in the manufacture of debris chutes;Identification bands for migratory birds;Pitless well heads and parts thereof;Reusable containers, specially designed to be employed in the transportation of motor vehicle components which are free of customs duties, presented with the goods therein;Seat post clamps and cable hangers for use in the manufacture of unicycles, bicycles or tricycles;Semi-elliptical heads, of an external diameter of either 609.6 mm or 762 mm, to specification ASTM A455, for use in air compressor tanks;Snap hooks of forged steel, zinc plated, 12.5 cm to 23 cm in length, for use in the manufacture of debris chutes and chute hoists;Steel stanchions for confining livestock either in pens or individually;The following to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells or potash or rock salt deposits:Flanged casing heads;Screwed casing heads for surface casings of an external diameter exceeding 273 mm, or rated for service in working pressures exceeding 14 MPa W.O.G. (water, oil, gas);Well packers and parts thereof;To be employed in the processing, storing or insemination of animal semen;Tracks for use in the manufacture of skid steer loaders;Vacuum evaporator masks, of stainless steel, having a 90% front etch and 10% back etch, for the production of photo cells;Wick sustainers for use in the manufacture of candles
- Steel stanchions, for confining livestock either in pens or individually | - | | |
| 7326.90.10 | 20 | Other articles of iron or steel. - Other - Couplings for sucker rods, pony rods or polished rods for oilfield related pumps;Fishing tools and parts thereof to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells or for drilling machinery employed in the exploration, discovery, development or operation of potash or rock salt deposits;For climbing or mountaineering;For keeping nets open and swivels, to be employed in commercial fishing or in the commercial harvesting of marine plants;For use in the manufacture of detectors for propane or other toxic fumes;For use in the manufacture of fire fighting vehicles;For use in the manufacture of goods of Section XVI or of Chapter 73, such goods being used in the recovery or production of crude oil from shales, oil-sands or tar-sands;For use in the manufacture or repair of engines or parts thereof for commercial fishing vessels;Forged steel clevis hooks and eye hooks for use in the manufacture of debris chutes;Identification bands for migratory birds;Pitless well heads and parts thereof;Reusable containers, specially designed to be employed in the transportation of motor vehicle components which are free of customs duties, presented with the goods therein;Seat post clamps and cable hangers for use in the manufacture of unicycles, bicycles or tricycles;Semi-elliptical heads, of an external diameter of either 609.6 mm or 762 mm, to specification ASTM A455, for use in air compressor tanks;Snap hooks of forged steel, zinc plated, 12.5 cm to 23 cm in length, for use in the manufacture of debris chutes and chute hoists;Steel stanchions for confining livestock either in pens or individually;The following to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells or potash or rock salt deposits:Flanged casing heads;Screwed casing heads for surface casings of an external diameter exceeding 273 mm, or rated for service in working pressures exceeding 14 MPa W.O.G. (water, oil, gas);Well packers and parts thereof;To be employed in the processing, storing or insemination of animal semen;Tracks for use in the manufacture of skid steer loaders;Vacuum evaporator masks, of stainless steel, having a 90% front etch and 10% back etch, for the production of photo cells;Wick sustainers for use in the manufacture of candles
- Identification bands for migratory birds | - | | |
| 7326.90.10 | 30 | Other articles of iron or steel. - Other - Couplings for sucker rods, pony rods or polished rods for oilfield related pumps;Fishing tools and parts thereof to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells or for drilling machinery employed in the exploration, discovery, development or operation of potash or rock salt deposits;For climbing or mountaineering;For keeping nets open and swivels, to be employed in commercial fishing or in the commercial harvesting of marine plants;For use in the manufacture of detectors for propane or other toxic fumes;For use in the manufacture of fire fighting vehicles;For use in the manufacture of goods of Section XVI or of Chapter 73, such goods being used in the recovery or production of crude oil from shales, oil-sands or tar-sands;For use in the manufacture or repair of engines or parts thereof for commercial fishing vessels;Forged steel clevis hooks and eye hooks for use in the manufacture of debris chutes;Identification bands for migratory birds;Pitless well heads and parts thereof;Reusable containers, specially designed to be employed in the transportation of motor vehicle components which are free of customs duties, presented with the goods therein;Seat post clamps and cable hangers for use in the manufacture of unicycles, bicycles or tricycles;Semi-elliptical heads, of an external diameter of either 609.6 mm or 762 mm, to specification ASTM A455, for use in air compressor tanks;Snap hooks of forged steel, zinc plated, 12.5 cm to 23 cm in length, for use in the manufacture of debris chutes and chute hoists;Steel stanchions for confining livestock either in pens or individually;The following to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells or potash or rock salt deposits:Flanged casing heads;Screwed casing heads for surface casings of an external diameter exceeding 273 mm, or rated for service in working pressures exceeding 14 MPa W.O.G. (water, oil, gas);Well packers and parts thereof;To be employed in the processing, storing or insemination of animal semen;Tracks for use in the manufacture of skid steer loaders;Vacuum evaporator masks, of stainless steel, having a 90% front etch and 10% back etch, for the production of photo cells;Wick sustainers for use in the manufacture of candles
- The following, to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells or potash or rock salt deposits: Flanged casing heads; Screwed casing heads, for surface casings, of an external diameter exceeding 273 mm, or rated for service in working pressures exceeding 14 MPa W.O.G. (water, oil, gas); Well packers and parts thereof | - | | |
| 7326.90.10 | 40 | Other articles of iron or steel. - Other - Couplings for sucker rods, pony rods or polished rods for oilfield related pumps;Fishing tools and parts thereof to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells or for drilling machinery employed in the exploration, discovery, development or operation of potash or rock salt deposits;For climbing or mountaineering;For keeping nets open and swivels, to be employed in commercial fishing or in the commercial harvesting of marine plants;For use in the manufacture of detectors for propane or other toxic fumes;For use in the manufacture of fire fighting vehicles;For use in the manufacture of goods of Section XVI or of Chapter 73, such goods being used in the recovery or production of crude oil from shales, oil-sands or tar-sands;For use in the manufacture or repair of engines or parts thereof for commercial fishing vessels;Forged steel clevis hooks and eye hooks for use in the manufacture of debris chutes;Identification bands for migratory birds;Pitless well heads and parts thereof;Reusable containers, specially designed to be employed in the transportation of motor vehicle components which are free of customs duties, presented with the goods therein;Seat post clamps and cable hangers for use in the manufacture of unicycles, bicycles or tricycles;Semi-elliptical heads, of an external diameter of either 609.6 mm or 762 mm, to specification ASTM A455, for use in air compressor tanks;Snap hooks of forged steel, zinc plated, 12.5 cm to 23 cm in length, for use in the manufacture of debris chutes and chute hoists;Steel stanchions for confining livestock either in pens or individually;The following to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells or potash or rock salt deposits:Flanged casing heads;Screwed casing heads for surface casings of an external diameter exceeding 273 mm, or rated for service in working pressures exceeding 14 MPa W.O.G. (water, oil, gas);Well packers and parts thereof;To be employed in the processing, storing or insemination of animal semen;Tracks for use in the manufacture of skid steer loaders;Vacuum evaporator masks, of stainless steel, having a 90% front etch and 10% back etch, for the production of photo cells;Wick sustainers for use in the manufacture of candles
- Pitless well heads and parts thereof | - | | |
| 7326.90.10 | 50 | Other articles of iron or steel. - Other - Couplings for sucker rods, pony rods or polished rods for oilfield related pumps;Fishing tools and parts thereof to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells or for drilling machinery employed in the exploration, discovery, development or operation of potash or rock salt deposits;For climbing or mountaineering;For keeping nets open and swivels, to be employed in commercial fishing or in the commercial harvesting of marine plants;For use in the manufacture of detectors for propane or other toxic fumes;For use in the manufacture of fire fighting vehicles;For use in the manufacture of goods of Section XVI or of Chapter 73, such goods being used in the recovery or production of crude oil from shales, oil-sands or tar-sands;For use in the manufacture or repair of engines or parts thereof for commercial fishing vessels;Forged steel clevis hooks and eye hooks for use in the manufacture of debris chutes;Identification bands for migratory birds;Pitless well heads and parts thereof;Reusable containers, specially designed to be employed in the transportation of motor vehicle components which are free of customs duties, presented with the goods therein;Seat post clamps and cable hangers for use in the manufacture of unicycles, bicycles or tricycles;Semi-elliptical heads, of an external diameter of either 609.6 mm or 762 mm, to specification ASTM A455, for use in air compressor tanks;Snap hooks of forged steel, zinc plated, 12.5 cm to 23 cm in length, for use in the manufacture of debris chutes and chute hoists;Steel stanchions for confining livestock either in pens or individually;The following to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells or potash or rock salt deposits:Flanged casing heads;Screwed casing heads for surface casings of an external diameter exceeding 273 mm, or rated for service in working pressures exceeding 14 MPa W.O.G. (water, oil, gas);Well packers and parts thereof;To be employed in the processing, storing or insemination of animal semen;Tracks for use in the manufacture of skid steer loaders;Vacuum evaporator masks, of stainless steel, having a 90% front etch and 10% back etch, for the production of photo cells;Wick sustainers for use in the manufacture of candles
- Couplings for sucker rods, pony rods or polished rods for oilfield related pumps | - | | |
| 7326.90.10 | 60 | Other articles of iron or steel. - Other - Couplings for sucker rods, pony rods or polished rods for oilfield related pumps;Fishing tools and parts thereof to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells or for drilling machinery employed in the exploration, discovery, development or operation of potash or rock salt deposits;For climbing or mountaineering;For keeping nets open and swivels, to be employed in commercial fishing or in the commercial harvesting of marine plants;For use in the manufacture of detectors for propane or other toxic fumes;For use in the manufacture of fire fighting vehicles;For use in the manufacture of goods of Section XVI or of Chapter 73, such goods being used in the recovery or production of crude oil from shales, oil-sands or tar-sands;For use in the manufacture or repair of engines or parts thereof for commercial fishing vessels;Forged steel clevis hooks and eye hooks for use in the manufacture of debris chutes;Identification bands for migratory birds;Pitless well heads and parts thereof;Reusable containers, specially designed to be employed in the transportation of motor vehicle components which are free of customs duties, presented with the goods therein;Seat post clamps and cable hangers for use in the manufacture of unicycles, bicycles or tricycles;Semi-elliptical heads, of an external diameter of either 609.6 mm or 762 mm, to specification ASTM A455, for use in air compressor tanks;Snap hooks of forged steel, zinc plated, 12.5 cm to 23 cm in length, for use in the manufacture of debris chutes and chute hoists;Steel stanchions for confining livestock either in pens or individually;The following to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells or potash or rock salt deposits:Flanged casing heads;Screwed casing heads for surface casings of an external diameter exceeding 273 mm, or rated for service in working pressures exceeding 14 MPa W.O.G. (water, oil, gas);Well packers and parts thereof;To be employed in the processing, storing or insemination of animal semen;Tracks for use in the manufacture of skid steer loaders;Vacuum evaporator masks, of stainless steel, having a 90% front etch and 10% back etch, for the production of photo cells;Wick sustainers for use in the manufacture of candles
- Vacuum evaporator masks, of stainless steel, having a 90% front etch and a 10% back etch, for the production of photo cells | - | | |
| 7326.90.10 | 70 | Other articles of iron or steel. - Other - Couplings for sucker rods, pony rods or polished rods for oilfield related pumps;Fishing tools and parts thereof to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells or for drilling machinery employed in the exploration, discovery, development or operation of potash or rock salt deposits;For climbing or mountaineering;For keeping nets open and swivels, to be employed in commercial fishing or in the commercial harvesting of marine plants;For use in the manufacture of detectors for propane or other toxic fumes;For use in the manufacture of fire fighting vehicles;For use in the manufacture of goods of Section XVI or of Chapter 73, such goods being used in the recovery or production of crude oil from shales, oil-sands or tar-sands;For use in the manufacture or repair of engines or parts thereof for commercial fishing vessels;Forged steel clevis hooks and eye hooks for use in the manufacture of debris chutes;Identification bands for migratory birds;Pitless well heads and parts thereof;Reusable containers, specially designed to be employed in the transportation of motor vehicle components which are free of customs duties, presented with the goods therein;Seat post clamps and cable hangers for use in the manufacture of unicycles, bicycles or tricycles;Semi-elliptical heads, of an external diameter of either 609.6 mm or 762 mm, to specification ASTM A455, for use in air compressor tanks;Snap hooks of forged steel, zinc plated, 12.5 cm to 23 cm in length, for use in the manufacture of debris chutes and chute hoists;Steel stanchions for confining livestock either in pens or individually;The following to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells or potash or rock salt deposits:Flanged casing heads;Screwed casing heads for surface casings of an external diameter exceeding 273 mm, or rated for service in working pressures exceeding 14 MPa W.O.G. (water, oil, gas);Well packers and parts thereof;To be employed in the processing, storing or insemination of animal semen;Tracks for use in the manufacture of skid steer loaders;Vacuum evaporator masks, of stainless steel, having a 90% front etch and 10% back etch, for the production of photo cells;Wick sustainers for use in the manufacture of candles
- Semi-elliptical heads, of an external diameter of either 609.6 mm or
762 mm, to specification ASTM A455, for use in air compressor tanks | - | | |
| 7326.90.10 | 80 | Other articles of iron or steel. - Other - Couplings for sucker rods, pony rods or polished rods for oilfield related pumps;Fishing tools and parts thereof to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells or for drilling machinery employed in the exploration, discovery, development or operation of potash or rock salt deposits;For climbing or mountaineering;For keeping nets open and swivels, to be employed in commercial fishing or in the commercial harvesting of marine plants;For use in the manufacture of detectors for propane or other toxic fumes;For use in the manufacture of fire fighting vehicles;For use in the manufacture of goods of Section XVI or of Chapter 73, such goods being used in the recovery or production of crude oil from shales, oil-sands or tar-sands;For use in the manufacture or repair of engines or parts thereof for commercial fishing vessels;Forged steel clevis hooks and eye hooks for use in the manufacture of debris chutes;Identification bands for migratory birds;Pitless well heads and parts thereof;Reusable containers, specially designed to be employed in the transportation of motor vehicle components which are free of customs duties, presented with the goods therein;Seat post clamps and cable hangers for use in the manufacture of unicycles, bicycles or tricycles;Semi-elliptical heads, of an external diameter of either 609.6 mm or 762 mm, to specification ASTM A455, for use in air compressor tanks;Snap hooks of forged steel, zinc plated, 12.5 cm to 23 cm in length, for use in the manufacture of debris chutes and chute hoists;Steel stanchions for confining livestock either in pens or individually;The following to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells or potash or rock salt deposits:Flanged casing heads;Screwed casing heads for surface casings of an external diameter exceeding 273 mm, or rated for service in working pressures exceeding 14 MPa W.O.G. (water, oil, gas);Well packers and parts thereof;To be employed in the processing, storing or insemination of animal semen;Tracks for use in the manufacture of skid steer loaders;Vacuum evaporator masks, of stainless steel, having a 90% front etch and 10% back etch, for the production of photo cells;Wick sustainers for use in the manufacture of candles
- Tracks, for use in the manufacture of skid steer loaders | - | | |
| 7326.90.10 | 90 | Other articles of iron or steel. - Other - Couplings for sucker rods, pony rods or polished rods for oilfield related pumps;Fishing tools and parts thereof to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells or for drilling machinery employed in the exploration, discovery, development or operation of potash or rock salt deposits;For climbing or mountaineering;For keeping nets open and swivels, to be employed in commercial fishing or in the commercial harvesting of marine plants;For use in the manufacture of detectors for propane or other toxic fumes;For use in the manufacture of fire fighting vehicles;For use in the manufacture of goods of Section XVI or of Chapter 73, such goods being used in the recovery or production of crude oil from shales, oil-sands or tar-sands;For use in the manufacture or repair of engines or parts thereof for commercial fishing vessels;Forged steel clevis hooks and eye hooks for use in the manufacture of debris chutes;Identification bands for migratory birds;Pitless well heads and parts thereof;Reusable containers, specially designed to be employed in the transportation of motor vehicle components which are free of customs duties, presented with the goods therein;Seat post clamps and cable hangers for use in the manufacture of unicycles, bicycles or tricycles;Semi-elliptical heads, of an external diameter of either 609.6 mm or 762 mm, to specification ASTM A455, for use in air compressor tanks;Snap hooks of forged steel, zinc plated, 12.5 cm to 23 cm in length, for use in the manufacture of debris chutes and chute hoists;Steel stanchions for confining livestock either in pens or individually;The following to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells or potash or rock salt deposits:Flanged casing heads;Screwed casing heads for surface casings of an external diameter exceeding 273 mm, or rated for service in working pressures exceeding 14 MPa W.O.G. (water, oil, gas);Well packers and parts thereof;To be employed in the processing, storing or insemination of animal semen;Tracks for use in the manufacture of skid steer loaders;Vacuum evaporator masks, of stainless steel, having a 90% front etch and 10% back etch, for the production of photo cells;Wick sustainers for use in the manufacture of candles
- Other | - | | |
| 8210.00 | | Hand-operated mechanical appliances, weighing 10 kg or less, used in the preparation, conditioning or serving of food or drink. | | | |
| 8210.00.90 | | Hand-operated mechanical appliances, weighing 10 kg or less, used in the preparation, conditioning or serving of food or drink. - Other | - | Free | CCCT, LDCT |
| 8210.00.90 | 20 | Hand-operated mechanical appliances, weighing 10 kg or less, used in the preparation, conditioning or serving of food or drink. - Other - Can openers | - | | |
| 8210.00.90 | 90 | Hand-operated mechanical appliances, weighing 10 kg or less, used in the preparation, conditioning or serving of food or drink. - Other - Other | - | | |
| 82.11 | | Knives with cutting blades, serrated or not (including pruning knives), other than knives of heading 82.08, and blades therefor. | | | |
| 8211.94 | | Knives with cutting blades, serrated or not (including pruning knives), other than knives of heading 82.08, and blades therefor.
- Other: - Blades | | | |
| 82.04 | | Hand-operated spanners and wrenches (including torque meter wrenches but not including tap wrenches); interchangeable spanner sockets, with or without handles. | | | |
Harmonized Tariff Schedule of the Canada inquiry: aircraft+parts
