| 7209.28 | 021 | (1)Having a minimum yield point of 275 MPa |
| 72.10 | | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated |
| 7210.20 | 000 | Plated or coated with lead, including terne-plate |
| 7210.30 | 021 | (1)Of steel of a thickness of less than 3 mm and having a minimum yield point of 275 MPa or of a thickness of 3 mm or more and having a minimum yield point of 355 MPa |
| 7210.41 | 000 | Corrugated |
| 7210.49 | 010 | - Hot-dip galvannealed, of plated or coated layers undergone a homogeneous alloying process (containing by weight of 7 % or more of iron in the entire layers) |
| 7210.50 | | Plated or coated with chromium oxides or with chromium and chromium oxides |
| 7210.50 | | Plated or coated with aluminium |
| 7210.61 | 000 | Plated or coated with aluminium-zinc alloys |
| 72.11 | | Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated |
| 72.11 | | Not further worked than hot-rolled |
| 7211.13 | | Rolled on four faces or in a closed box pass, of a width exceeding 150 mm and a thickness of not less than 4 mm, not in coils and without patterns in relief |
| 7211.13 | 021 | (1)Having a minimum yield point of 355 MPa |
| 7211.14 | 021 | (1)Having a minimum yield point of 355 MPa |
| 7211.19 | 021 | (1)Of a thickness of less than 3 mm and having a minimum yield point of 275 MPa or of a thickness of 3 mm or more and having a minimum yield point of 355 MPa |
| 7211.19 | | Not further worked than cold-rolled (cold-reduced) |
| 7211.29 | 010 | 1 Of a thickness of less than 3 mm and having a minimum yield point of 275 MPa or of a thickness of 3 mm or more and having a minimum yield point of 355 MPa |
| 72.12 | | Flat-rolled products of iron or non-alloy steel, of a width of less than 600mm, clad, plated or coated |
| 7212.20 | 021 | (1)Of steel of a thickness of less than 3 mm and having a minimum yield point of 275 MPa or of a thickness of 3 mm or more and having a minimum yield point of 355 MPa |
| 72.13 | | Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel |
| 7213.10 | 000 | Containing indentations, ribs, grooves or other deformations produced during the rolling process |
| 7213.20 | 000 | Other, of free-cutting steel |
| 7213.91 | | Of circular cross-section measuring less than 14 mm in diameter |
Harmonized Tariff Schedule of Japans inquiry: /etc/passwd
