| 7208.51.00 | 45 | Of high-strength steel | kg | | | |
| 7209.16.00 | 30 | Of high-strength steel: | | | | |
| 7209.17.00 | 30 | Of high-strength steel: | | | | |
| 7209.18.15 | | Of high-strength steel | | Free | | 0.4¢/kg + 20% |
| 7210.30.00 | 30 | Of high-strength steel | kg | | | |
| 7210.49.00 | 30 | Of high-strength steel | kg | | | |
| 7211.14.00 | 30 | Of high-strength steel | kg | | | |
| 7211.19.15 | 00 | Of high-strength steel | kg | Free | | 25% |
| 7211.19.45 | 00 | Of high-strength steel | kg | Free | | 20% |
| 7211.23.15 | 00 | Of high-strength steel | kg | Free | | 25% |
| 7312.10.10 | 50 | Other, stranded wire having a lay or twist of not more than 1 revolution for a length equal to the strand diameter multiplied by 8.5 | kg | | | |
| 7312.10.30 | 20 | Other, stranded wire having a lay or twist of not more than 1 revolution for a length equal to the strand diameter multiplied by 8.5 | kg | | | |
| 7317.00.55 | 01 | Collated roofing nails with a length of 20.6 mm to 46.1 mm, a head diameter of 8.3 mm to 10.6 mm, a shank diameter of 2.5 mm to 3.2 mm, whether or not galvanized | kg | | | |
| 7317.00.55 | 19 | With a length of less than 25.4 mm and with a diameter of less than 1.65 mm | kg | | | |
| 7318.15.40 | 00 | Machine screws 9.5 mm or more in length and 3.2 mm or more in diameter (not including cap screws) | kg | Free | | 2.2¢/kg |
| 7326.90.25 | 00 | Cable or inner wire for caliper and cantilever brakes and casing therefor, whether or not cut to length | kg | Free | | 45% |
| 7601.10.30 | 00 | Of uniform cross section throughout its length, the least cross-sectional dimension of which is not greater than 9.5 mm, in coils | kg | 2.6% | Free (A+,AU,BH, CA,D,E,IL,J,JO, MA,MX, P,SG) 0.9% (CL) | 18.5% |
| 7601.20.30 | 00 | Of uniform cross section throughout its length, the least cross-sectional dimension of which is not greater than 9.5 mm, in coils | kg | 2.6% | Free (A,AU,BH, CA,D,E,IL,J,JO, MA,MX, P,SG) 0.9% (CL) | 18.5% |
| 7601.20.90 | 45 | Of uniform circular cross section throughout its length, not in coils | kg | | | |
| 8202.40.60 | 30 | In continuous lengths | m | | | |
| 8203.10.30 | 00 | Not over 11 cm in length | doz. | Free | | 47.5¢/doz. |
| 8203.10.60 | 00 | Over 11 cm but not over 17 cm in length | doz. | Free | | 62.5¢/doz. |
| 8203.10.90 | 00 | Over 17 cm in length | doz. | Free | | 77.5¢/doz. |
| 8208.10.00 | 30 | Over 30.5 cm in length, for metal shearing machines or over 15.2 cm in diameter for metal shearing/slitting machines | No. | | | |
| 8208.20.00 | 30 | Over 73.7 cm in length, for veneer-cutting machines | No. | | | |
Harmonized Tariff Schedule of the United States inquiry: 3203Ã
