| 7306.30.50 | 25 | With an outside diameter not exceeding 114.3 mm: | | | | |
| 7306.40.50 | 62 | With an outside diameter not exceeding 114.3 mm: | | | | |
| 7306.40.50 | 85 | With an outside diameter exceeding 114.3 mm but not exceeding 406.4 mm: | | | | |
| 7306.50.50 | 50 | With an outside diameter not exceeding 114.3 mm | kg | | | |
| 7306.50.50 | 70 | With an outside diameter exceeding 114.3 mm but not exceeding 406.4 mm | kg | | | |
| 7307.91.50 | 10 | With an inside diameter of less than 360 mm: | | | | |
| 7307.91.50 | 50 | With an inside diameter of 360 mm or more: | | | | |
| 7307.93.30 | | With an inside diameter of less than 360 mm: | | | | |
| 7307.93.90 | | With an inside diameter of 360 mm or more | | 4.3% | Free (A,AU,B,BH, CA,CL,E,IL,J,JO, MA,MX, P,SG) | 45% |
| 7309.00.00 | | Reservoirs, tanks, vats and similar containers for any material (other than compressed or liquefied gas), of iron or steel, of a capacity exceeding 300 liters, whether or not lined or heat insulated, but not fitted with mechanical or thermal equipment | | Free | | 45% |
| 7310 | | Tanks, casks, drums, cans, boxes and similar containers, for any material (other than compressed or liquefied gas), of iron or steel, of a capacity not exceeding 300 liters, whether or not lined or heat insulated, but not fitted with mechanical or thermal equipment: | | | | |
| 7311.00.00 | 30 | Certified prior to exportation to have been made in accordance with the safety requirements of sections 178.36 through 178.68 of title 49 CFR or under a specific exemption to those requirements: | | | | |
| 7311.00.00 | 30 | Seamless steel containers not overwrapped, marked DOT 3A, 3AX, 3AA, 3AAX, 3B, 3E, 3HT, 3T or DOT-E followed by a specific exemption number | No. kg | | | |
| 7314.12.20 | 00 | With meshes finer than 12 but not finer than 36 wires to the lineal centimeter in warp or filling | m2 kg | Free | | 50% |
| 7314.12.30 | 00 | With meshes finer than 36 wires to the lineal centimeter in warp or filling: | | | | |
| 7314.14.20 | 00 | With meshes finer than 12 but not finer than 36 wires to the lineal centimeter in warp or filling | m2 kg | Free | | 50% |
| 7314.14.30 | 00 | With meshes finer than 36 wires to the lineal centimeter in warp or maximum: | | | | |
| 7314.20.00 | 00 | Grill, netting and fencing, welded at the intersection, of wire with a maximum cross-sectional dimension of 3 mm or more and having a mesh size of 100 cm2 or more | kg | Free | | 45% |
| 7315.11.00 | 10 | Of not over 50 mm pitch and containing more than 3 parts per pitch: | | | | |
| 7315.12.00 | 20 | Of not over 50 mm pitch and containing more than 3 parts per pitch | kg | | | |
| 7317.00 | | Nails, tacks, drawing pins, corrugated nails, staples (other than those of heading 8305) and similar articles, of iron or steel, whether or not with heads of other material, but excluding such articles with heads of copper: | | | | |
| 7317.00.55 | 01 | Collated roofing nails with a length of 20.6 mm to 46.1 mm, a head diameter of 8.3 mm to 10.6 mm, a shank diameter of 2.5 mm to 3.2 mm, whether or not galvanized | kg | | | |
| 7318.15.40 | 00 | Machine screws 9.5 mm or more in length and 3.2 mm or more in diameter (not including cap screws) | kg | Free | | 2.2￠/kg |
| 7321.90.10 | 00 | Of articles in subheading 7321.11.30: | | | | |
| 7404.00.30 | 45 | Containing more than 0.3 percent of lead | kg | | | |
