| 7204.41.00 | | Turnings, shavings, chips, milling waste, sawdust, filings, trimmings and stampings, whether or not in bundles | | Free | | 74￠/t |
| 7207.11.00 | 00 | Of rectangular (including square) cross section, the width measuring less than twice the thickness | kg | Free | | 20% |
| 7207.12.00 | 10 | Having a width measuring less than four times the thickness | kg | | | |
| 7207.12.00 | 50 | Having a width measuring at least four times the thickness | kg | | | |
| 7207.20.00 | 25 | Having a width measuring less than four times the thickness | kg | | | |
| 7207.20.00 | 45 | Having a width measuring at least four times the thickness | kg | | | |
| 7208.10.30 | 00 | Of a thickness of 4.75 mm or more | kg | Free | | 20% |
| 7208.10.60 | 00 | Of a thickness of less than 4.75 mm | kg | Free | | 20% |
| 7208.25 | | Of a thickness of 4.75 mm or more: | | | | |
| 7208.25.30 | 00 | Of high-strength steel | kg | Free | | 20% |
| 7208.26.00 | | Of a thickness of 3 mm or more but less than 4.75 mm | | Free | | 0.4￠/kg + 20% |
| 7208.26.00 | 30 | High-strength steel | kg | | | |
| 7208.27.00 | | Of a thickness of less than 3 mm | | Free | | 0.4￠/kg + 20% |
| 7208.27.00 | 30 | High-strength steel | kg | | | |
| 7208.36.00 | | Of a thickness exceeding 10 mm | | Free | | 20% |
| 7208.36.00 | 30 | High-strength steel | kg | | | |
| 7208.37.00 | | Of a thickness of 4.75 mm or more but not exceeding 10 mm | | Free | | 20% |
| 7208.37.00 | 30 | High-strength steel | kg | | | |
| 7208.38.00 | | Of a thickness of 3 mm or more but less than 4.75 mm | | Free | | 20% |
| 7208.38.00 | 15 | High-strength steel | kg | | | |
| 7208.39.00 | | Of a thickness of less than 3 mm | | Free | | 20% |
| 7208.39.00 | 15 | High-strength steel | kg | | | |
| 7208.40.30 | | Of a thickness of 4.75 mm or more | | Free | | 20% |
| 7208.40.30 | 30 | Of a thickness exceeding 10 mm | kg | | | |
| 7208.40.60 | | Of a thickness of less than 4.75 mm | | Free | | 20% |
