| 7306.69 | | Of other noncircular cross section: | | | | |
| 7307.19.30 | 70 | With mechanical, push-on (rubber compression) or flanged joints attached | kg | | | |
| 7307.19.90 | 30 | Unions | kg | | | |
| 7308 | | Structures (excluding prefabricated buildings of heading 9406) and parts of structures (for example, bridges and bridge sections, lock gates, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, shutters, balustrades, pillars and columns) of iron or steel; plates, rods, angles, shapes, sections, tubes and the like, prepared for use in structures, of iron or steel: | | | | |
| 7308.10.00 | 00 | Bridges and bridge sections | kg | Free | | 45% |
| 7310.21.00 | 25 | Containers, of circular cross section, of a volume capacity between 11.4 liters and 26.6 liters, of a kind used for the conveyance of goods | No. | | | |
| 7310.29.00 | 25 | Containers, of circular cross section, of a volume capacity between 11.4 liters and 26.6 liters, of a kind used for the conveyance of goods | No. | | | |
| 7311.00.00 | 30 | Certified prior to exportation to have been made in accordance with the safety requirements of sections 178.36 through 178.68 of title 49 CFR or under a specific exemption to those requirements: | | | | |
| 7311.00.00 | 30 | Seamless steel containers not overwrapped, marked DOT 3A, 3AX, 3AA, 3AAX, 3B, 3E, 3HT, 3T or DOT-E followed by a specific exemption number | No. kg | | | |
| 7312.10.10 | 50 | Other, stranded wire having a lay or twist of not more than 1 revolution for a length equal to the strand diameter multiplied by 8.5 | kg | | | |
| 7312.10.30 | 20 | Other, stranded wire having a lay or twist of not more than 1 revolution for a length equal to the strand diameter multiplied by 8.5 | kg | | | |
| 7314.20.00 | 00 | Grill, netting and fencing, welded at the intersection, of wire with a maximum cross-sectional dimension of 3 mm or more and having a mesh size of 100 cm2 or more | kg | Free | | 45% |
| 7314.31 | | Other grill, netting and fencing, welded at the intersection: | | | | |
| 7314.41.00 | 40 | Of wire with maximum cross- sectional dimension of 1 mm | kg | | | |
| 7315.12.00 | 60 | Cast and combination chain | kg | | | |
| 7315.89.10 | 00 | With links of essentially round cross sections: | | | | |
| 7317.00.55 | | Of one piece construction: | | | | |
| 7320.10.30 | 00 | Suitable for motor vehicle suspension: | | | | |
| 7320.20.10 | 00 | Suitable for motor-vehicle suspension | kg | 3.2% | Free (A,AU,B,BH, CA,CL,E,IL,J,JO, MA,MX, P,SG) | 25% |
| 7320.20.50 | 10 | Helical springs, of wire having a cross-sectional dimension of less than 5.1 mm: | | | | |
| 7320.20.50 | 45 | Helical springs, of wire having a cross-sectional dimension of 5.1 mm or more but less than 12.7 mm | kg | | | |
| 7321.90.40 | 00 | Door assemblies, incorporating more than one of the following: inner panel, outer panel, window, insulation | X | Free | | 45% |
| 7322 | | Radiators for central heating, not electrically heated, and parts thereof, of iron or steel; air heaters and hot air distributors (including distributors which can also distribute fresh or conditioned air), not electrically heated, incorpora- ting a motor-driven fan or blower, and parts thereof, of iron or steel: | | | | |
| 7323.91.10 | 00 | Coated or plated with precious metal | X | Free | | 20% |
| 7323.99.10 | 00 | Coated or plated with precious metal: | | | | |
