| 7013.10.10 | 00 | Kitchenware, non-glazed, greater than 75 percent by volume crystalline, of lithium aluminosilicate, having a linear coefficient of expansion not exceeding 10 x 10-7 per Kelvin within a temperature range of 0 degrees C to 300 degrees C, transparent, haze-free, exhibiting transmittances of infrared radiations in excess of 75 percent at a wavelength of 2.5 microns when measured on a sample 3 mm in thickness, and containing beta-quartz solid solution as the predominant crystal phase | No. | 6.9% | Free (A,AU,BH,CA, CL,E,IL,J,JO, MA,MX,P, SG) | 75% |
| 7019.11.00 | 00 | Chopped strands, of a length of not more than 50 mm | kg | 4.9% | Free (A,BH,CA, CL,E,IL,J,JO, MA,MX, P,SG) 3% (AU) | 50% |
| 7019.19.30 | 00 | Chopped strands, of a length more than 50 mm | kg | 4.9% | Free (A,BH,CA, CL,E,IL,J,JO, MA,MX, P,SG) 3% (AU) | 50% |
| 7113.11.10 | 00 | Rope, curb, cable, chain and similar articles produced in continuous lengths, all the fore- going, whether or not cut to specific lengths and whether or not set with imitation pearls or imitation gemstones, suitable for use in the manufacture of articles provided for in this heading | X | 6.3% | Free (A,AU,BH,CA, CL,E,IL,J,JO, MA,MX,P, SG) | 80% |
| 7113.19.10 | 00 | Rope, curb, cable, chain and similar articles produced in continuous lengths, all the fore- going, whether or not cut to specific lengths and whether or not set with imitation pearls or imitation gemstones, suitable for use in the manufacture of articles provided for in this heading | X | 7% | Free (A,AU,BH,CA, CL,E,IL,J,JO,MA, MX,P,SG) | 80% |
| 7113.20.10 | 00 | Rope, curb, cable, chain and similar articles pro- duced in continuous lengths, all the foregoing, whether ornot cut to specific lengths and whether or not set with imitation pearls or imitation gem- stones, suitable for use in the manufacture of articles provided for in this heading | X | 7% | Free (A,AU,BH,CA, CL,E,IL,J,JO, MA,MX,P, SG) | 80% |
| 7117.19.05 | 00 | Rope, curb, cable, chain and similar articles produced in continuous lengths, all the fore- going, whether or not cut to specific lengths and whether or not set with imitation pearls or imitation gemstones, suitable for use in the manufacture of articles provided for in this heading: | | | | |
| 7312.10.10 | 50 | Other, stranded wire having a lay or twist of not more than 1 revolution for a length equal to the strand diameter multiplied by 8.5 | kg | | | |
| 7312.10.30 | 20 | Other, stranded wire having a lay or twist of not more than 1 revolution for a length equal to the strand diameter multiplied by 8.5 | kg | | | |
| 7317.00.55 | 01 | Collated roofing nails with a length of 20.6 mm to 46.1 mm, a head diameter of 8.3 mm to 10.6 mm, a shank diameter of 2.5 mm to 3.2 mm, whether or not galvanized | kg | | | |
| 7317.00.55 | 19 | With a length of less than 25.4 mm and with a diameter of less than 1.65 mm | kg | | | |
| 7318.15.40 | 00 | Machine screws 9.5 mm or more in length and 3.2 mm or more in diameter (not including cap screws) | kg | Free | | 2.2￠/kg |
| 7326.90.25 | 00 | Cable or inner wire for caliper and cantilever brakes and casing therefor, whether or not cut to length | kg | Free | | 45% |
| 7601.10.30 | 00 | Of uniform cross section throughout its length, the least cross-sectional dimension of which is not greater than 9.5 mm, in coils | kg | 2.6% | Free (A+,AU,BH, CA,D,E,IL,J,JO, MA,MX, P,SG) 0.9% (CL) | 18.5% |
| 7601.20.30 | 00 | Of uniform cross section throughout its length, the least cross-sectional dimension of which is not greater than 9.5 mm, in coils | kg | 2.6% | Free (A,AU,BH, CA,D,E,IL,J,JO, MA,MX, P,SG) 0.9% (CL) | 18.5% |
| 7601.20.90 | 45 | Of uniform circular cross section throughout its length, not in coils | kg | | | |
| 8202.40.60 | 30 | In continuous lengths | m | | | |
| 8203.10.30 | 00 | Not over 11 cm in length | doz. | Free | | 47.5￠/doz. |
| 8203.10.60 | 00 | Over 11 cm but not over 17 cm in length | doz. | Free | | 62.5￠/doz. |
| 8203.10.90 | 00 | Over 17 cm in length | doz. | Free | | 77.5￠/doz. |
| 8208.10.00 | 30 | Over 30.5 cm in length, for metal shearing machines or over 15.2 cm in diameter for metal shearing/slitting machines | No. | | | |
| 8208.20.00 | 30 | Over 73.7 cm in length, for veneer-cutting machines | No. | | | |
| 8208.20.00 | 60 | Over 15.2 cm in length, for wood-chipper machines | No. | | | |
| 8211.91.20 | 00 | Valued under 25￠/each, not over 25.9 cm in overall length | pcs. | 0.4￠/each + 6.4% | Free (A+,AU,BH, CA,CL,E,D,E,IL, J,JO,MA,MX, P,SG) | 2￠/each + 45% |
| 8211.91.30 | 00 | Valued under 25￠/each, not over 25.9 cm in overall length | pcs. | 0.9￠/each + 10.6% | Free (AU,BH,CA,D, E,IL,J,JO,MA, MX,P) 0.3￠/each + 3.9% (CL,SG) | 2￠/each + 45% |
