2619.00 | | Slag, dross (other than granulated slag), scalings and other waste from the manufacture of iron or steel: | | | | |
2620 | | Slag, ash and residues (other than from the manufacture of iron or steel), containing arsenic, metals or their compounds: | | | | |
2620.21.00 | | Leaded gasoline sludges and leaded anti- knock compound sludges | | Free | | 8.8¢/kg on copper content + 3.3¢/kg on lead content + 3.7¢/kg on zinc content |
2620.99.50 | 00 | Slag containing by weight over 40 percent titanium, and which if containing over 2 percent by weight of copper, lead, or zinc is not to be treated for the recovery thereof | kg | Free | | Free |
2621 | | Other slag and ash, including seaweed ash (kelp); ash and residues from the incineration of municipal waste: | | | | |
2712 | | Petroleum jelly; paraffin wax, microcrystalline petroleum wax, slack wax, ozokerite, lignite wax, peat wax, other mineral waxes and similar products obtained by synthesis or by other processes, whether or not colored: | | | | |
3204.17.90 | 46 | Pigment yellow 12, dry, presscake or aqueous slurry | kg | | | |
3204.17.90 | 18 | Pigment red 57:1, dry, presscake or aqueous slurry | kg | | | |
3204.17.90 | 02 | Pigment blue 15:3, dry, presscake or aqueous slurry | kg | | | |
3207 | | Prepared pigments, prepared opacifiers and prepared colors, vitrifiable enamels and glazes, engobes (slips), liquid lustres and similar preparations, of a kind used in the ceramic, enamelling or glass industry; glass frit and other glass, in the form of powder, granules or flakes: | | | | |
3207.20.00 | 00 | Vitrifiable enamels and glazes, engobes (slips) and similar preparations | kg | 4.9% | Free (A,AU,BH, CA,CL,E,IL,J,JO, MA,MX,P,SG) | 30% |
3702.53.00 | | Of a width exceeding 16 mm but not exceeding 35 mm and of a length not exceeding 30 m, for slides | | 3.7% | Free (A,AU,BH, CA,CL,E,IL,J,JO, MA,MX,P,SG) | 25% |
3702.54.00 | | Of a width exceeding 16 mm but not exceeding 35 mm and of a length not exceeding 30 m, other than for slides | | 3.7% | Free (A,AU,BH, CA,CL,E,IL,J,JO, MA,MX,P,SG) | 25% |
3825 | | Residual products of the chemical or allied industries, not elsewhere specified or included; municipal waste; sewage sludge; other wastes specified in note 6 to this chapter: | | | | |
3825.20.00 | 00 | Sewage sludge | X | Free | | Free |
3924.90.10 | | Curtains and drapes, including panels and valances; napkins, table covers, mats, scarves, runners, doilies, centerpieces, antimacassars and furniture slipcovers; and like furnishings | | 3.3% | Free (A,AU,BH, CA,CL,E,IL,J,JO, MA,MX,P,SG) | 25% |
3926.20.60 | 00 | Plastic rainwear, including jackets, coats, ponchos, parkas and slickers, featuring an outer shell of polyvinyl chloride plastic with or without attached hoods, valued not over $10 per unit | doz. | Free | | 25% |
3926.90.50 | 00 | Frames or mounts for photographic slides | X | 3.8% | Free (A,AU,BH, CA,CL,E,IL,J,JO, MA,MX,P,SG) | 45% |
4115 | | Composition leather with a basis of leather or leather fiber, in slabs, sheets or strip, whether or not in rolls; parings and other waste of leather or of composition leather, not suitable for the manufacture of leather articles; leather dust, powder and flour: | | | | |
4115.10.00 | 00 | Composition leather with a basis of leather or leather fiber, in slabs, sheets or strip, whether or not in rolls | kg | Free | | 10% |
4403.20.00 | 20 | Southern yellow pine (Loblolly pine (Pinus taeda)), long leaf pine (Pinus palustris), pitch pine (Pinus rigida), short leaf pine (Pinus echinada), slash pine (Pinus elliottii) and Virginia pine (Pinus virginiana) | m3 | | | |
4406 | | Railway or tramway sleepers (cross-ties) of wood: | | | | |
4407 | | Wood sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness exceeding 6 mm: | | | | |
4407.10.01 | 46 | Southern yellow pine (Loblolly pine (Pinus taeda)), long leaf pine (Pinus palustris), pitch pine (Pinus rigida), short leaf pine (Pinus echinata), slash pine (Pinus elliottii) and Virginia pine (Pinus virginiana): | | | | |
4408 | | Sheets for veneering (including those obtained by slicing laminated wood), for plywood or for similar laminated wood and other wood, sawn lengthwise, sliced or peeled, whether or not planed, sanded, spliced or end-jointed, of a thickness not exceeding 6 mm: | | | | |